The tan Countryman E6X Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and 3.5mm locking Connector for Azden Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 3.5mm locking connector for direct connection to Azden older 10BT and 41BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Azden Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Can the x1n Transmitter be used on a d750 with a Nikon sb700 and a Godox Ad200 keeping TTL?

A: The X1T-N will work on a D750 with an AD200 full TTL, HSS and manual adjustments. In order to have it work with an SB you will need a receiver for the flash https://bhpho.to/2Xj9N7M.

Q: 2. Is this compatible with the Canon 430EX iii-RT speedlight?

A: It is not directly compatible. You would need a receiver to make it work. https://bhpho.to/2LEUdzx

Q: 3. Is this compatible with Sierra macOS 10.12.6 ?

A: The Canon PIXMA iP8720 is compatible with Mac OS 10.12.6.

Q: 4. In the article, it says it's compatible with ETTL I. However, on the downloadable manual, it says it's only compatible with ETTL II. Will this work with the 430 EX ETTL I ?

A: According to Canon, the Speedlite 430EX features E-TTL II, E-TTL, and TTL. It'll be a good match for your original 430 EX.

Q: 5. Is this compatible with Godox FT-16?

A: No. The X system is 2.4GHz, the F system is 433MHz. Godox has created XT16 replacement triggers for the lights that can use FT16 receivers: XTR16 and XTR16s. These let you use an AD180, AD360, V850, or V860 with the X1T transmitters.

Q: 6. I use my Sony A7III with the Sony FA-WRC1M transmitter to fire my Sony HVL-F60RM. I want to add to this set a Godox AD200Pro. Is it possible to use the AD200Pro with this Godox X1R-S receiver and shoot with the Sony FA-WRC1M?

A: Unfortunately, the FA-WRC1M can only fire flashes that are equipped with a Sony FA-WRR1 Wireless Radio Receiver or have a Sony wireless receiver built in. The Godox X1 series works on a different frequency.

Q: 7. will the odox X1T-F TTL Wireless Flash Trigger Transmitter for Fujifilm work on the XPro1 ?

A: Yes, the Fujifilm X-Pro1 is listed as compatible for use with the Godox X1T-F TTL Wireless Flash Trigger Transmitter for Fujifilm, B&H # GOX1TF. However, do note that on Godox's webpage, they state Fuji cameras are divided into three kinds according to their different ways to control flash. The X-Pro1 is in their B category, and it will be compatible with Standard TTL and Manual flash, as well as standard Stroboscopic Flash capabilities when using the X1T-F wireless trigger. It will not have rear-curtain sync or High-Speed Sync (Focal Plane Sync) capabilities, and the AF-Assist Beam will not illuminate when using the X-Pro1 (or X-T10, X-E1, or X-A3 cameras, all which have similar performance as the X-Pro1 with the Godox X1T-F TTL Wireless Flash Trigger Transmitter for Fujifilm).

Q: 8. How do you set this transmitter for more chanels then A, B, C? There should be way to set it to D and F but I don't see it on it

A: I have the Fuji version but I assume it is the same. You turn the wheel on the back until the group you want is underlined (A-E on mine), hit group button to lock it in then you can hit mode button to switch TTL-M-off and turn the wheel to adjust.

Q: 9. I am migrating from a Nikon DSLR to Fuji X-T3, but would like to keep using my two SB-600 strobes (presently hooked up via a Yongnuo N system). Will two of the X1R-N, controlled from an XPro-F on the camera, do the job?

A: You can trigger your Nikon SB-600 flashes with X1R-N receivers on each from the Godox X-Pro F transmitter, but TTL is not guaranteed.

Q: 10. Will this work with z6ii and sb 5000?

A: Yes, the Nikon SU-800 Wireless Speedlight Commander Unit is compatible with both Nikon Z6 II Mirrorless Cameras as well as the Nikon SB-5000 AF Speedlights.