The tan Countryman E6X Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and TA4F Connector for CAD Audio Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a TA4F connector for direct connection to CAD Audio WX155A wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    CAD Audio Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this trigger work with a godox flash for Sony used as a remote?

A: If you are using a Godox-branded flash designed for Sony cameras, if the Godox flash has the most recent firmware update, and you are using a Micro Four Thirds camera (either an Olympus or Panasonic M43 camera), then yes, the Godox X1T-O TTL Wireless Flash Trigger Transmitter for Olympus/Panasonic, B&H # GOX1TCOP, listed above mounted on your M43 camera would be able to wirelessly trigger your Godox-branded Sony flash as the most recent firmware update from Godox allows for cross-platform compatibility with their X-system flashes.

Q: 2. I have a Godox X2-N trigger, a Godox V1 and looking purchasing a Sekonic L308X-U light meter. Can a Godox X1R-N be used in combination with the Sekonic L308X-U to trigger the V1 to capture the exposure settings?

A: You could do it with a transmitter https://bhpho.to/2KmsMZn but not the receiver.

Q: 3. For the D850, do I need the adapter also or just the transmitter and receiver?

A: You need the receiver, the adapter, and the transmitter. The transmitter is the one shown - the WR-T10. You also need the WR-R10 receiver and for the D850 with a 10 pin port, the WR-A10 adapter. You can use this for other cameras tht have different ports with the appropriate adapter. The wireless system has longer range and is more reliable than the consumer remote that uses IR. This is more expensive, but more effective.

Q: 4. Will the Godox X1 trigger and receiver combo fire and control the Yongnuo YN565EX and YN568EX?

A: The transmitter and receiver combination will with with the YN flashes when the receiver is on the YN flash. The YN do not have a compatible internal receiver for the Godox system.

Q: 5. Is this compatible with Speedlight 430 EXii?

A: The X1T-C TTL Wireless Flash Trigger Set from Godox is compatible with Canon cameras and flashes that support E-TTL / E-TTL II including the 430 EX II.

Q: 6. I dont quite understand, do you need the SU800 to operate the Pocket wizards for the D850? Or can you use the Pocket Wizards alone? If you need the wizard, where does it go on the SU800

A: It depends on what you wish to trigger and how many Pocket Wizards you are willing to invest in. The SU-800 is handy for Macro control of flash for the small SB-200 units as well as any older optical flash control units you may have. With the advent of the SB-5000 speedlites, radio control is just as effective with Nikons own WR-R10 mounted on camera and the above lights set to radio control. The pocket wizards can be very good, depending on models, though expensive as you need a receiver on every speedlite you have.

Q: 7. Is this compatible with the Sony a6300 & a6500?

A: Yes, the Godox X1T-S TTL Wireless Flash Trigger Transmitter for Sony, B&H # GOX1TS, is compatible for use with the Sony Multi-Interface hot shoe used on the Sony Alpha a6300 and a6500 Mirrorless Digital Camera.

Q: 8. is the x1n transmitter can be used on a nikon 3400,in order to trigger an ad200?

A: Yes, this transmitter will work on an Nikon to fire the AD200.

Q: 9. Will this work with Sony RX10?

A: This flash has the Sony/Minolta shoe and will not work directly with the Sony RX10. You will need the following adapter to use this flash on the RX10: a href= http://bhpho.to/1cjK16q target= _blank http://bhpho.to/1cjK16q/a

Q: 10. will this work with godox 2.4 GHz because, this unit is also 2.4 GHz ?? J. Payne

A: The Godox X1T-O TTL Wireless Flash Trigger Transmitter for Olympus/Panasonic is compatible for use with Godox receivers and flashes that use Godox's 2.4 GHz X wireless system.