The light beige Countryman E6X Directional Earset Mic, Low Gain with Detachable 2mm Cable and 3.5mm locking Connector for Senal Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6X earset's cable terminates to a 3.5mm locking connector for direct connection to Senal AWS-2000T wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Senal Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. For the D850, do I need the adapter also or just the transmitter and receiver?

A: You need the receiver, the adapter, and the transmitter. The transmitter is the one shown - the WR-T10. You also need the WR-R10 receiver and for the D850 with a 10 pin port, the WR-A10 adapter. You can use this for other cameras tht have different ports with the appropriate adapter. The wireless system has longer range and is more reliable than the consumer remote that uses IR. This is more expensive, but more effective.

Q: 2. I have a Godox X2-N trigger, a Godox V1 and looking purchasing a Sekonic L308X-U light meter. Can a Godox X1R-N be used in combination with the Sekonic L308X-U to trigger the V1 to capture the exposure settings?

A: You could do it with a transmitter https://bhpho.to/2KmsMZn but not the receiver.

Q: 3. Will it handle transparency sheets? Can I print wirelessly from my computer?

A: I only use this printer wirelessly from three different computers. A Compaq, a Lenovo, and the afore mentioned iPad mini. Yes it is large, maximum print width is 13 inches. There has to be room for the print carriage to clear the paper at both ends. If you want large prints it takes a large printer.

Q: 4. Will this fire a Godox AD200?

A: This is the receiver. What you will need for the AD200 is a transmitter https://bhpho.to/2Z3nzyJ for your camera.

Q: 5. Does 16 inch Mac Pro fit?

A: Yes, a 16.2" Macbook Pro measures 14.01 x 9.77 x 0.66", so it can fit the laptop sleeve on the Manfrotto Pro Light Multiloader 17L.

Q: 6. Is this compatible with the Sony A7IV?

A: Yes, the Godox SK400II-V Studio Flash Monolight (2-Light Kit) is compatible with the Sony A7IV. It comes with a universal radio trigger with a single pin on the hotshoe for manual triggering of the flash units.

Q: 7. I dont quite understand, do you need the SU800 to operate the Pocket wizards for the D850? Or can you use the Pocket Wizards alone? If you need the wizard, where does it go on the SU800

A: It depends on what you wish to trigger and how many Pocket Wizards you are willing to invest in. The SU-800 is handy for Macro control of flash for the small SB-200 units as well as any older optical flash control units you may have. With the advent of the SB-5000 speedlites, radio control is just as effective with Nikons own WR-R10 mounted on camera and the above lights set to radio control. The pocket wizards can be very good, depending on models, though expensive as you need a receiver on every speedlite you have.

Q: 8. How can I use two of these alongside my Westcott FJ400? What trigger? (Sony A7IV)

A: Using your Westcott trigger to "fire" the Westcott FJ 400, set the Godox SK400II-V Studio Flash Monolight, to one of its three Optical Trigger Modes. The preferred setting is Optic S1 secondary flash with optic sensor. With this function, the flash will fire synchronously when the main flash fires, the same effect as that by the use of radio triggers. This helps create multiple lighting effects.

Q: 9. Is the LED modeling lamp on the MS300-V daylight or tungsten balanced?

A: Thank you for waiting. The MS300-V has a daylight balanced LED modeling lamp.

Q: 10. How do I know if the Air10 is communicating with my SONY A9? the test pilot will trigger i60a flash but won't fire when shutter release...

A: The Flash Mode in the Camera Settings 1 would need to be set for Wireless (WL) in order to use the Air 10 Transmitter properly on the Sony A9.