The cocoa Countryman E6i Directional Earset Mic, Medium Gain with Detachable 1mm Cable and 4-pin female proprietary Connector for Fender Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a 4-pin female proprietary connector for direct connection to Fender Passport wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Fender Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is a Wireless Flash Trigger Receiver required with the SB-600? I can't find a list of compatible Nikon Speed lights.

A: You will need a receiver for the Nikon flash units. https://bhpho.to/2VTCQfw

Q: 2. When the X1 is on my camera can another flash be in the X1 hots shoe to operate when it's not being a transmitter? I have been reading and can't find the answer.

A: You can have a flash in the shoe. It can work while the X1 is transmitting.

Q: 3. Does it work with non-Nikon flashes ? I have a Lumopro 180 as well as a Nikon SB-700. Will the SU-800 trigger both?

A: Hmmmm Trigger, or be able to use all the TTL abilities? If the other flash is triggered by a blast of infrared, it will probably set it off, but I doubt very much if it will have the full range of TTL control (unless the other manufacturer's flash manual says specifically that it does) that the SU-800 provides when working with Nikon's own flashes (I use it with SB-700's and the R1C1).

Q: 4. Will this trigger a combination of AD200 and Canon 600EX-RT flashes?

A: The Godox X1T-C TTL Wireless Flash Trigger Transmitter for Canon will trigger the AD200. But the only way it will trigger the Canon 600EX-RT is by adding a Godox receiver to it. The receiver is, Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon BH #GOX1RC • MFR #X1R

Q: 5. Does the hss work with nikon d3300?

A: Yes. Read the booklet very carefully and practice its use under various lighting conditions to understand how to make adjustments as needed. I have been using rechargeable batteries which is much cheaper . Very happy.

Q: 6. How do I know if the Air10 is communicating with my SONY A9? the test pilot will trigger i60a flash but won't fire when shutter release...

A: The Flash Mode in the Camera Settings 1 would need to be set for Wireless (WL) in order to use the Air 10 Transmitter properly on the Sony A9.

Q: 7. How do you set this transmitter for more chanels then A, B, C? There should be way to set it to D and F but I don't see it on it

A: I have the Fuji version but I assume it is the same. You turn the wheel on the back until the group you want is underlined (A-E on mine), hit group button to lock it in then you can hit mode button to switch TTL-M-off and turn the wheel to adjust.

Q: 8. Will the Godox X1 trigger and receiver combo fire and control the Yongnuo YN565EX and YN568EX?

A: The transmitter and receiver combination will with with the YN flashes when the receiver is on the YN flash. The YN do not have a compatible internal receiver for the Godox system.

Q: 9. Setup: Lead photographer on a Nikon D7100. 2nd shooter on a D5100. 1 group of 3 flashes that need to go off at the same time during reception. Both the lead photographer & 2nd shooter need to independently be able to trigger the group. What we already have: Nikon SB-700, YN685, YN560IV, YN622N-trigger, YN622N-controller. My question is what are we missing so both photographers can set off flash group during wedding reception? Also have a cheap insignia flash that the YN622N-tx is able to set off if I wanted to add another flash to the group which had a 622 trigger on it but it broke. So maybe I need two or three more 622N triggers & one more 622N-controller for my 2nd shooter's camera??

A: Sounds like both photographers need to have controllers on their camera matched to the flashes. Each controller should trigger the flashes up to 300' or so. The B&H rep will be able to help you with the correct devices.

Q: 10. Does it work with Canon 5DIV and 600EX-RT II?

A: I have for Nikon. very good, I think the best of them is that they are not expensive and work great if you are starting in photography and you need triggers these are excellent, I have a few months using them and I have not had any kind of problem Tengo para NIKON. muy buenos, creo que lo mejor de ellos es que no son costoso y funcionan de maravilla si ests iniciando en la fotografa y necesitas disparadores estos son excelentes, ya tengo unos meses usndolos y no e tenido ningn tipo de problema