The cocoa Countryman E6 Omnidirectional Earset Mic, Standard Gain with Detachable 2mm Cable and cH-Style 4-Pin Connector for Audio Technica Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a cH-style 4-pin connector for direct connection to Audio Technica ATW-3201 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Audio Technica Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is this compatible with Godox FV150 High Speed Sync Flash LED Light ?

A: No it's not compatible

Q: 2. I dont quite understand, do you need the SU800 to operate the Pocket wizards for the D850? Or can you use the Pocket Wizards alone? If you need the wizard, where does it go on the SU800

A: It depends on what you wish to trigger and how many Pocket Wizards you are willing to invest in. The SU-800 is handy for Macro control of flash for the small SB-200 units as well as any older optical flash control units you may have. With the advent of the SB-5000 speedlites, radio control is just as effective with Nikons own WR-R10 mounted on camera and the above lights set to radio control. The pocket wizards can be very good, depending on models, though expensive as you need a receiver on every speedlite you have.

Q: 3. Is this compatible with the Good TT350/nikon TTL?

A: This transmitter is compatible with a Godox tt350.

Q: 4. Setup: Lead photographer on a Nikon D7100. 2nd shooter on a D5100. 1 group of 3 flashes that need to go off at the same time during reception. Both the lead photographer & 2nd shooter need to independently be able to trigger the group. What we already have: Nikon SB-700, YN685, YN560IV, YN622N-trigger, YN622N-controller. My question is what are we missing so both photographers can set off flash group during wedding reception? Also have a cheap insignia flash that the YN622N-tx is able to set off if I wanted to add another flash to the group which had a 622 trigger on it but it broke. So maybe I need two or three more 622N triggers & one more 622N-controller for my 2nd shooter's camera??

A: Sounds like both photographers need to have controllers on their camera matched to the flashes. Each controller should trigger the flashes up to 300' or so. The B&H rep will be able to help you with the correct devices.

Q: 5. Does Nikon or Vello have a similar product / cost...for the Nikon D7100? Thank you.

A: The ML-L3 is compatible with the D7100.

Q: 6. Does it work with non-Nikon flashes ? I have a Lumopro 180 as well as a Nikon SB-700. Will the SU-800 trigger both?

A: Hmmmm Trigger, or be able to use all the TTL abilities? If the other flash is triggered by a blast of infrared, it will probably set it off, but I doubt very much if it will have the full range of TTL control (unless the other manufacturer's flash manual says specifically that it does) that the SU-800 provides when working with Nikon's own flashes (I use it with SB-700's and the R1C1).

Q: 7. Will it work with a telescope?

A: Unfortunately, the Nikon ML-L3 Wireless Remote Control (Infrared) is only made to work with certain Nikon cameras.

Q: 8. hi, does it work with the nikon d800e?, and I have 2 nikon flashes the sb-700 and an older one, would it work with both units? at the same time?thanks

A: The D800e has the flash commander mode built into it, and thus there is no need to purchase this device to use with it. The D800e can trigger any flash models which are compatible with the i-TTL wireless system, including the SB600, SB700, SB800, SB900, SB910. Page 185 of the D800e's instruction manual details how to set the camera up to trigger these flash units. If you would like to confirm if your orlder one is compatible, please send an email to askbh@bhphoto.com and our agents there can confirm its compatibility.

Q: 9. Does the hss work with nikon d3300?

A: Yes. Read the booklet very carefully and practice its use under various lighting conditions to understand how to make adjustments as needed. I have been using rechargeable batteries which is much cheaper . Very happy.

Q: 10. Hi, would it work with Nikon D3300?

A: Absolutely! It will also work with the Yongnuo wireless triggers too.