The light beige Countryman E6 Directional Earset Mic, Low Gain with Detachable 1mm Cable and 3.5mm Connector for Comtek Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 3.5mm connector for direct connection to Comtek M-72 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Comtek Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. If I use this on a Sony flash with the Godox transmitter, and a Godox flash with in-built receiver, will I have any issues with the two flashes syncing?

A: No, you would not hace a ny problema because hoy are swing the Godox tranmitter and receiver sostn for your camera brandy. In this case, Sony.

Q: 2. With XProC on camera and 580 Speedlight on XR1-c, can I access Flash settings via camera External Flash Setting settings?

A: Yes, the Godox X1R-C TTL Wireless Flash Receiver for Canon with the 580 flash can be controlled using he Godox XProC.

Q: 3. Has anyone used this with a Sony A7r Camera and a Nikon Flash? Specifically an SB-700

A: While I cannot confirm usage with your specific gear combination listed above, I can state that yes, the Godox X1N TTL Wireless Flash Trigger Set for Nikon would be compatible for use with the Sony a7C Mirrorless Camera.

Q: 4. Is this compatible with Godox FV150 High Speed Sync Flash LED Light ?

A: No it's not compatible

Q: 5. Will the Godox X1 trigger and receiver combo fire and control the Yongnuo YN565EX and YN568EX?

A: The transmitter and receiver combination will with with the YN flashes when the receiver is on the YN flash. The YN do not have a compatible internal receiver for the Godox system.

Q: 6. Does it work with Canon 5DIV and 600EX-RT II?

A: I have for Nikon. very good, I think the best of them is that they are not expensive and work great if you are starting in photography and you need triggers these are excellent, I have a few months using them and I have not had any kind of problem Tengo para NIKON. muy buenos, creo que lo mejor de ellos es que no son costoso y funcionan de maravilla si ests iniciando en la fotografa y necesitas disparadores estos son excelentes, ya tengo unos meses usndolos y no e tenido ningn tipo de problema

Q: 7. Will this trigger fire a Godox TT350O Mini Thinklite TTL Flash for Olympus/Panasonic Cameras?

A: Yes.

Q: 8. Has anyone made this work with a combination Sony A7Riii and a Nikon flash? Specifically an SB-700 firing remotely?

A: Yes, this could work with the A7R III to fire the SB-700. However, the fitment of the transmitter would be as secure on the Sony shoe.

Q: 9. Is this compatible with Speedlight 430 EXii?

A: The X1T-C TTL Wireless Flash Trigger Set from Godox is compatible with Canon cameras and flashes that support E-TTL / E-TTL II including the 430 EX II.

Q: 10. Will this trigger a combination of AD200 and Canon 600EX-RT flashes?

A: The Godox X1T-C TTL Wireless Flash Trigger Transmitter for Canon will trigger the AD200. But the only way it will trigger the Canon 600EX-RT is by adding a Godox receiver to it. The receiver is, Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon BH #GOX1RC • MFR #X1R