The light beige Countryman E6i Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 2.5mm locking Connector for Comtek Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 2.5mm locking connector for direct connection to Comtek M-216 and M-72 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Comtek Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is this compatible with the Good TT350/nikon TTL?

A: This transmitter is compatible with a Godox tt350.

Q: 2. Can I use a mag mod grip with with this flash?

A: Yes, it will fit.

Q: 3. Does it work with Canon 5DIV and 600EX-RT II?

A: I have for Nikon. very good, I think the best of them is that they are not expensive and work great if you are starting in photography and you need triggers these are excellent, I have a few months using them and I have not had any kind of problem Tengo para NIKON. muy buenos, creo que lo mejor de ellos es que no son costoso y funcionan de maravilla si ests iniciando en la fotografa y necesitas disparadores estos son excelentes, ya tengo unos meses usndolos y no e tenido ningn tipo de problema

Q: 4. hi, does it work with the nikon d800e?, and I have 2 nikon flashes the sb-700 and an older one, would it work with both units? at the same time?thanks

A: The D800e has the flash commander mode built into it, and thus there is no need to purchase this device to use with it. The D800e can trigger any flash models which are compatible with the i-TTL wireless system, including the SB600, SB700, SB800, SB900, SB910. Page 185 of the D800e's instruction manual details how to set the camera up to trigger these flash units. If you would like to confirm if your orlder one is compatible, please send an email to askbh@bhphoto.com and our agents there can confirm its compatibility.

Q: 5. Will this trigger a combination of AD200 and Canon 600EX-RT flashes?

A: The Godox X1T-C TTL Wireless Flash Trigger Transmitter for Canon will trigger the AD200. But the only way it will trigger the Canon 600EX-RT is by adding a Godox receiver to it. The receiver is, Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon BH #GOX1RC • MFR #X1R

Q: 6. Does the hss work with nikon d3300?

A: Yes. Read the booklet very carefully and practice its use under various lighting conditions to understand how to make adjustments as needed. I have been using rechargeable batteries which is much cheaper . Very happy.

Q: 7. I want to add the SB600 flash to my Godox system. Do I need the X1R-N or the X1R-N trigger receiver?

A: The X1 has two components: the X1T (T stands for transmitter) and the X1R (R for receiver). To add non-Godox radio items to your Godox wireless system, get the X1R-N. To trigger and control Godox devices and items mounted on Godox receivers, get the X1T-N (N for Nikon).

Q: 8. What is the function of the top shoe? Thanks

A: The top shoe is designed on the Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon if you want to put a shoe mount flash on top of the camera while using the transmitter. Note, it is just a pass through. Meaning the shoe mount flash will be manual only, not TTL.

Q: 9. Has anyone made this work with a combination Sony A7Riii and a Nikon flash? Specifically an SB-700 firing remotely?

A: Yes, this could work with the A7R III to fire the SB-700. However, the fitment of the transmitter would be as secure on the Sony shoe.

Q: 10. Is this compatible with Godox FV150 High Speed Sync Flash LED Light ?

A: No it's not compatible