The tan Countryman E6i Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and TA4F Connector for Shure Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a TA4F connector for direct connection to Shure AD1, ADX1, AXT100TA4F, GLXD1, PGXD1, QLXD1, and ULXD1 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Shure Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does the hss work with nikon d3300?

A: Yes. Read the booklet very carefully and practice its use under various lighting conditions to understand how to make adjustments as needed. I have been using rechargeable batteries which is much cheaper . Very happy.

Q: 2. where can I get an instruction book?

A: The flash already comes with a quick starter guide. A detailed manual can be located on the at the following link provided below https://bit.ly/3zwEZCK

Q: 3. with these triggers can I use the DGbees 800 and the alienbee 1600?

A: Yes this trigger set can work with Paul C. Buff mononlights.

Q: 4. Does a mag mod grip fit the flash?

A: Yes, the Magmod fits this flash.

Q: 5. hi, does it work with the nikon d800e?, and I have 2 nikon flashes the sb-700 and an older one, would it work with both units? at the same time?thanks

A: The D800e has the flash commander mode built into it, and thus there is no need to purchase this device to use with it. The D800e can trigger any flash models which are compatible with the i-TTL wireless system, including the SB600, SB700, SB800, SB900, SB910. Page 185 of the D800e's instruction manual details how to set the camera up to trigger these flash units. If you would like to confirm if your orlder one is compatible, please send an email to askbh@bhphoto.com and our agents there can confirm its compatibility.

Q: 6. What do I need to connect a Nikon Z7 to an SB 5000 off camera?

A: This set would do

Q: 7. If I use this on a Sony flash with the Godox transmitter, and a Godox flash with in-built receiver, will I have any issues with the two flashes syncing?

A: No, you would not hace a ny problema because hoy are swing the Godox tranmitter and receiver sostn for your camera brandy. In this case, Sony.

Q: 8. Has anyone used this with a Sony A7r Camera and a Nikon Flash? Specifically an SB-700

A: While I cannot confirm usage with your specific gear combination listed above, I can state that yes, the Godox X1N TTL Wireless Flash Trigger Set for Nikon would be compatible for use with the Sony a7C Mirrorless Camera.

Q: 9. Will this trigger fire a Godox TT350O Mini Thinklite TTL Flash for Olympus/Panasonic Cameras?

A: Yes.

Q: 10. Will this trigger a combination of AD200 and Canon 600EX-RT flashes?

A: The Godox X1T-C TTL Wireless Flash Trigger Transmitter for Canon will trigger the AD200. But the only way it will trigger the Canon 600EX-RT is by adding a Godox receiver to it. The receiver is, Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon BH #GOX1RC • MFR #X1R