The tan Countryman E6i Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and LEMO 6-pin Connector for Micron Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a LEMO 6-pin connector for direct connection to Micron TX 700-Series wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Micron Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. With XProC on camera and 580 Speedlight on XR1-c, can I access Flash settings via camera External Flash Setting settings?

A: Yes, the Godox X1R-C TTL Wireless Flash Receiver for Canon with the 580 flash can be controlled using he Godox XProC.

Q: 2. with these triggers can I use the DGbees 800 and the alienbee 1600?

A: Yes this trigger set can work with Paul C. Buff mononlights.

Q: 3. What do I need to connect a Nikon Z7 to an SB 5000 off camera?

A: This set would do

Q: 4. Does this SU-800 transmitter work with the Phottix Odin 1 and 2 receivers for off-camera flash?

A: Don't think so. This is a line of sight transmitter. Phottix is radio

Q: 5. Will this trigger fire a Godox TT350O Mini Thinklite TTL Flash for Olympus/Panasonic Cameras?

A: Yes.

Q: 6. Is this compatible with Speedlight 430 EXii?

A: The X1T-C TTL Wireless Flash Trigger Set from Godox is compatible with Canon cameras and flashes that support E-TTL / E-TTL II including the 430 EX II.

Q: 7. I want to add the SB600 flash to my Godox system. Do I need the X1R-N or the X1R-N trigger receiver?

A: The X1 has two components: the X1T (T stands for transmitter) and the X1R (R for receiver). To add non-Godox radio items to your Godox wireless system, get the X1R-N. To trigger and control Godox devices and items mounted on Godox receivers, get the X1T-N (N for Nikon).

Q: 8. Does it work with Nikon sb 700 and Nikon sb 5000 flashes?

A: The Nissin Air 10s commander can be used to wirelessly control Nissin NAS (Nissin Air System) compatible flashes, including the Nissin MG80 Pro, MG60, or MG10. The Air 10s can also be used with older Nissin NAS compatible flashes, including the Nissin Di700A and i60A. Nikon's flashes are not built to be NAS compatible, therefore the Air 10s Nikon cannot be used to control the Nikon SB700 or SB5000 flashes.

Q: 9. Does the hss work with nikon d3300?

A: Yes. Read the booklet very carefully and practice its use under various lighting conditions to understand how to make adjustments as needed. I have been using rechargeable batteries which is much cheaper . Very happy.

Q: 10. Has anyone made this work with a combination Sony A7Riii and a Nikon flash? Specifically an SB-700 firing remotely?

A: Yes, this could work with the A7R III to fire the SB-700. However, the fitment of the transmitter would be as secure on the Sony shoe.