The black Countryman E6 Omnidirectional Earset Mic, Standard Gain with Detachable 2mm Cable and LEMO 3-Pin Connector for WisyCom Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40S, MTP41, and MTP41S wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits WisyCom Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is this compatible with the Olympus E-M10 I only see the E-M10 Mark II listed?

A: The X1-O trigger will work on any m43 Olympus camera (or Panasonic camera) that has a hot shoe. I use mine on an E-M1 Mk II and a E-M5 original. It also works in manual mode on any of my other cameras including film cameras.

Q: 2. with these triggers can I use the DGbees 800 and the alienbee 1600?

A: Yes this trigger set can work with Paul C. Buff mononlights.

Q: 3. Does the hss work with nikon d3300?

A: Yes. Read the booklet very carefully and practice its use under various lighting conditions to understand how to make adjustments as needed. I have been using rechargeable batteries which is much cheaper . Very happy.

Q: 4. Is this compatible with a HVL-F45RM flash? thank u

A: It is not directly compatible. You can use one of these receivers to make it work. https://bhpho.to/2Gh8EpU

Q: 5. Is it compatible with the canon 580 ex II flash? Do I need a separate receiver?

A: You'll need the Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon B&H # GOX1RC for the 580 EX II to fire it from the X1T-C Transmitter.

Q: 6. Will Godox x1t-N work with elinchrom strobes and is it compatible with their high speed sync functionality?

A: HelloIm new to using wireless triggers, and dont know if this Godox will meet your need. Im sorry Im unable to help.

Q: 7. Does this work with canon eos r

A: Yes this kit can work with the Canon EOS R.

Q: 8. Has anyone made this work with a combination Sony A7Riii and a Nikon flash? Specifically an SB-700 firing remotely?

A: Yes, this could work with the A7R III to fire the SB-700. However, the fitment of the transmitter would be as secure on the Sony shoe.

Q: 9. With XProC on camera and 580 Speedlight on XR1-c, can I access Flash settings via camera External Flash Setting settings?

A: Yes, the Godox X1R-C TTL Wireless Flash Receiver for Canon with the 580 flash can be controlled using he Godox XProC.

Q: 10. Will the Godox X1 trigger and receiver combo fire and control the Yongnuo YN565EX and YN568EX?

A: The transmitter and receiver combination will with with the YN flashes when the receiver is on the YN flash. The YN do not have a compatible internal receiver for the Godox system.