The tan E6 Directional Earset Mic, Medium Gain, with Detachable 2mm Cable and TA5F Connector for Lectrosonics Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Earset's cable terminates to a TA5F connector for direct connection to an Lectrosonics SM, SMa, SMb, SMDa, SMDb, SMQ, SMQa, SMQV, SMV, UM400a, or UM450 wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 2mm Cable    TA5F (SM), See Description    30 Hz to 15 kHz Frequency Response    Includes Cardioid & Hypercardioid Caps    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For speaking and vocals.

Related Questions and Answers

Q: 1. Can I use this trigger to fire a Godox AD600 Pro even in TTL and change the settings (power) in Manual mode?

A: Yes the X1 transmitter can control the AD600Pro In TTL and Manual power adjustments.

Q: 2. Does it work with Nikon sb 700 and Nikon sb 5000 flashes?

A: The Nissin Air 10s commander can be used to wirelessly control Nissin NAS (Nissin Air System) compatible flashes, including the Nissin MG80 Pro, MG60, or MG10. The Air 10s can also be used with older Nissin NAS compatible flashes, including the Nissin Di700A and i60A. Nikon's flashes are not built to be NAS compatible, therefore the Air 10s Nikon cannot be used to control the Nikon SB700 or SB5000 flashes.

Q: 3. will this work for both the godox ad200 and godox 850 ving? I have the xt16 receiver for the 850 ving

A: As the Godox VING V850II Li-Ion Flash Kit and the Godox AD200 TTL Pocket Flash Kit both have the built-in 2.4 GHz Wireless X System Receiver, yes, both flashes will be compatible for use with the Godox X1T-N TTL Wireless Flash Trigger Transmitter for Nikon.

Q: 4. Has anyone used this with a Sony A7r Camera and a Nikon Flash? Specifically an SB-700

A: While I cannot confirm usage with your specific gear combination listed above, I can state that yes, the Godox X1N TTL Wireless Flash Trigger Set for Nikon would be compatible for use with the Sony a7C Mirrorless Camera.

Q: 5. Does Nissin Air10 will work with Metz flash (64 Af1 and Metz 76Mz5?

A: The Nissin Air R Receiver for Nikon Flashes B&H # NINDARNIK is needed to fire the Metz 64AF1 attached to its shoe and the Metz 76MZ5 attached with a sync cable.

Q: 6. Does it work with Nissin i40?

A: The Nissin Air10s Wireless TTL Commander for Sony Cameras is not directly compatible for use with the Nissin i40 Compact Flash for Sony Cameras with Multi Interface Shoe. It is only designed for use with Nissin flashes that have the Nissin 2.4 GHz radio receiver built inside the flash, which are the flashes that end with the letter A indicating they are a part of Nissin's Air system (such as the Nissin Di700A and Nissin i60A flashes) or the Nissin Air R receiver. If you need to use the Nissin Air10s Wireless TTL Commander for Sony Cameras with your Nissin i40 Compact Flash for Sony Cameras with Multi Interface Shoe, you would have to purchase the Nissin Air R Receiver for Sony Flashes with Multi Interface Shoe, B&H # NINDARSNY, to connect to the bottom of the i40 flash. This would add the 2.4GHz radio to your flash for use with the Wireless TTL Commander.

Q: 7. Can I use this for Olympus OME-EM1 II with Godox TT-600? Or Do you recommend the other model?

A: Its comparable for Nikon/Godox flashes

Q: 8. Will Godox x1t-N work with elinchrom strobes and is it compatible with their high speed sync functionality?

A: HelloIm new to using wireless triggers, and dont know if this Godox will meet your need. Im sorry Im unable to help.

Q: 9. Is this compatible with the Olympus E-M10 I only see the E-M10 Mark II listed?

A: The X1-O trigger will work on any m43 Olympus camera (or Panasonic camera) that has a hot shoe. I use mine on an E-M1 Mk II and a E-M5 original. It also works in manual mode on any of my other cameras including film cameras.

Q: 10. Is this compatible with Godox FT-16?

A: No. The X system is 2.4GHz, the F system is 433MHz. Godox has created XT16 replacement triggers for the lights that can use FT16 receivers: XTR16 and XTR16s. These let you use an AD180, AD360, V850, or V860 with the X1T transmitters.