The Libec LX7 M Tripod With Pan and Tilt Fluid Head and Mid-Level Spreader delivers superior value with an aluminum tripod and a pan and tilt fluid head. It has a maximum height of 65.4" and a minimum height of 32" (81 cm). It can handle a load of up to 17.5 lb, and you can trace every motion, start to finish, with its super torque system. The fluid head is equipped with a sliding plate with a sliding range of +/- 1.6". The entire kit weighs 11.4 lb (5.2 kg). The LX7 M can operate in a temperature range of -4 to +140°F (-20 to +60°C). This tripod is ideal for small to mid-sized DV/HD and semi-shoulder cameras.

Aluminum Tripod    Pan and Tilt Fluid Head    Sliding Plate Included    Super Torque System    Load Capacity of 17.5 lb    Maximum Height of 65.4"    Outstanding Rigidity    Mid-Level Spreader Included    Tripod Case Included

Aluminum tripod with fluid pan and tilt head and mid-level spreader

Superb torque system for ultimate control

Outstanding rigidity and payload--up to 17.5 lb

Features a sliding plate (sliding range of +/- 1.6" (40mm)

Maximum height of 65.4"

Related Questions and Answers

Q: 1. Will this tripod be a good combination with the Manfrotto MVH500AH Fluid Video Head?

A: I don't use Video heads, however I believe this tripod would work well with any combination.It has all the fundamental makings of a very good tripod and then someGood luck and Aloha.....

Q: 2. Did I miss it or did they not say of what material this is made (aluminum, carbon fiber, etc.)?

A: This tripod, excepting the leg points and 1/4 screw, is made of plastic.

Q: 3. Does this Vello CB-600 Straight Flash Bracket work with this tripod ? I am a little concern that they may not work together. Here is my concern.The mount of the tripod, where you attach your camcorder to the tripod, has 1 screw and 1 little pin that can be pushed up and down. (Note: this little pin will go into a hole at the bottom of the camcorder when you attach your camcorder to the mount.)Now, could the knob at the bottom of bracket overlap with that little pin on the mount of the tripod when I try attach or screw the bracket into the tripod ?Thanks.

A: You can mount this bracket without issue. The little locating pin is ether removed or moved out of the way.

Q: 4. I want to video pool (billiard) games. A small light weight Canon HF G20 will be used. The tripod will be at the maximum height. The camcorder will point down about 45degrees and stay in a fixed position. Is this tripod a good choice for my application. Do i ned any accessories?

A: Yes this tripod would work perfectly for your needs. No other accessories should be needed for this setup.

Q: 5. Will this tripod support a Canon Rebel t5 Camera with a Sigma 150-600 contemporary lens attachef?

A: Yes, this tripod supports a Canon Rebel t5 Camera with a Sigma 150-600 contemporary lens attached

Q: 6. Can I use this with Canon 750d for sigma 150-600 sports lens

A: The Manfrotto will work but with a large lens like the Sigma 150-600 Sport I think you would be happier with a head that has an Arca type plate so you will have at least two screws holding on the plate.I use the MT055PRO3 combination mainly for macro and lighter work and for lenses 5lbs. and up I use the Wimberley WH200 and Benro BENRO COM48CXL COMBINATION SER 4 CF tripod.The gimbal might be overkill but any quality head with an arca type will be better and more secure than the Manfrotto with the single screw.

Q: 7. Does the tripod packaging come with a QR code, which Manfrotto now requires for product regstration?

A: I'm sorry, don't longer have it with me anymore.

Q: 8. Can the Manfrotto 520BALLSH 75mm Short Half-Ball be adapted for use on this tripod?

A: No, it would require you to use a bowl adapter Please review the following ProMediaGear 75mm Bowl Adapter (6") BH #PRTRHH2 • MFR #TRHH2 https://bhpho.to/3birdJt

Q: 9. What are the differences between this and the 190XPRO4?

A: The 055XPRO3 is a sturdier tripod. I needed a relatively inexpensive tripod for a 300 2.8 and the 190XPRO4 was too light and allowed for too much vibration. The 055 is still on the light side for the lens, but gets the job done without spending a lot more on a sturdier tripod

Q: 10. Is the handle adjustable?

A: The handle is telescoping just like the legs of the tripod. Not too much of an adjustable size range though...but good enough