Designed for professionals, photographers, and hobbyists, the graphite 935 Wheeled Waterproof Hard Case Pro Photo/Video Kit with Padded Dividers and Lid Organizer from Nanuk features a 28.5L case made from lightweight, crush, dust, and waterproof NK-7 polypropylene resin to protect and store delicate items like laptops, tablets, cameras and lenses, electronics, drones, sample kits, tools, handguns with spare magazines and hearing protection, medical equipment and first aid supplies, and equipment of all sorts. This version of the case comes with a padded insert and dividers to customize the 20.5 x 11.3 x 7.5" interior for protection of your gear. The lid organizer has clear, reinforced zippered pockets to provide even more storage.

Carry the case by one of the two hinged handles or pull it behind you on its low-profile wheels with the extendable handle. The handle has two stop positions with heights from the ground of 32" at low and 38" at the high setting. Its gasketed lid is held fast with dual PowerClaw latches. This patented latch system uses compressive force to tightly clamp the case shut to a waterproof and dustproof IP67 rating, with an integrated slide lock that prevents the case from opening during transport or if dropped. For additional security, the case accepts user-supplied padlocks. Its built-in pressure relief valve regulates the internal pressure, keeping your gear and the case from getting crushed during air travel and allowing you to open it without having to break a tough pressurized seal.

20.5 x 11.3 x 7.5" Interior    Crush, Dust, and Waterproof    Padded Insert with Lid Organizer    Dividers to Organize and Protect Gear    Extendable Handle & Low-Profile Wheels    Lightweight NK-7 Polypropylene Resin    PowerClaw Latching System    Automatic Pressure-Release Valve    Molded-In Bezel System and Padlock Holes

Related Questions and Answers

Q: 1. Does this work with standard 501 trips Manfrotto plates, such as will work with my Miller Versa plate assembly?

A: The Manfrotto MVH500AH Fluid Video Head with Flat Base will only accept the Manfrotto 500PLONG Video Camera Plate and will have issues with other plates like the Manfrotto 501PL Sliding Quick Release Plate with 1/4"-20 Screw because of the catch mechanism in the receiver. Consider instead the Manfrotto 502AH Pro Video Head with Flat Base, which can work with the Manfrotto 501PL Sliding Quick Release Plate with 1/4"-20 Screw, like the Miller Versa Baseplate Assembly. See the link below: https://bhpho.to/3Dr3Nyv

Q: 2. Will the tripod legs extend out horizontally? Looking to get the base all the way down to the ground for low angle shots.

A: I can get the legs out so they sit almost completely flat on the ground--perhaps 1 or 2 degrees above 90 degrees, with the center column then bringing the top of the head plate to 16.5 above the ground.

Q: 3. Is this tripod allowed in disneyland? it states in disneylnd faq that they allow tripods but not large tripods. Is this considered Large?

A: The Disneyland rule is Folding tripod stands or monopod stands that can fit inside a standard backpack are permitted. The folded length of this tripod and head is about 30 which would require a rather large backpack. My opinion is that probably the Park would allow it but that of course is up to the security staff. You may wish to consider this smaller Manfrotto with the MVH500AH Head, and the MT190XPRO4 Legs. It's folded length is about 25 . Finally, here is a very small yet capable travel tripod and head the Benro Aero 4 Video Travel Angel Tripod Kit which is only 21.7 when folded.

Q: 4. mail-in rebate valid in Canada?

A: Mail in rebates on the products we sell are generally US only as per the manufacturer. To be sure check through the rebate paperwork.

Q: 5. My english is poor, sorry. I need a Manfrotto padded bag for this kit. Manfrotto MVH500AH Flat Base Fluid Head + MT190XPRO4 Tripod Legs. What is the recommended model? Thanks

A: This kit includes the Vidpro TC35 Tripod Case, B&H # VITC35. https://bhpho.to/2AyGkMS

Q: 6. Hello,Is this head compatible with Nikon D610, and D7200?Is it suitable for still photography including landscape and macro? Thank you

A: Yes compatible with all camera

Q: 7. Is this head suitable for monopod with feet like ifootage cobra or manfrotto mvmxpro? The head with mvmxpro500 does not pan fromhead

A: Yes, the Manfrotto MVH500AH Fluid Video Head with Flat Base is compatible with an iFootage monopod like the iFootage Cobra 3 Aluminum Monopod with Mini Tripod Base and the Manfrotto MVMXPROA4US Aluminum XPRO Video Monopod+. The Manfrotto MVH500AH Fluid Video Head with Flat Base offers panning.

Q: 8. What are the dimensions of the head itself? Length and hight? I'm building a custom kit for travel videography and this is a key issue.

A: The height is 3.74 inches while the length is 4.7 inches.

Q: 9. Will my Manfrotto 577 plate fit on this? I'm trying to easily switch from glidecam to tripod with the quick release.

A: yes it can work no problem

Q: 10. can you detach the head by screwing it off?

A: Yes