The cocoa Countryman E6X Directional Earset Mic, Low Gain with Detachable 1mm Cable and 4-pin Hirose Connector for Sony Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6X earset's cable terminates to a 4-pin Hirose connector for direct connection to Sony DWT-B01, DWT-G01, DWT-S01, and DWT-V01 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sony Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. what godox flash is compatible with godox xpro ttl for pentax k3?

A: If you wish to use the flash on-camera, the Godox TT350P Mini Thinklite TTL Flash for Pentax Cameras, B&H # GOTT350P, is the only Godox flash we carry that is listed as compatible for use with Pentax's TTL automatic exposure system. However, if you plan to use the flash wirelessly off-camera with the Godox XProP TTL Wireless Flash Trigger for Pentax Cameras mounted to the camera's hot shoe, then you may use any Godox flash that has their X-Wireless Radio System built inside, as Godox's flashes with their X-Wireless Radio System have cross-brand platform support when used wirelessly. As such, you could use a Godox flash designed for another camera brand for off-camera usage, such as the TTL flashes listed below. The manual flashes I have also listed below would be compatible for use with the Godox XProP TTL Wireless Flash Trigger for Pentax Cameras and would allow you to set the flash output power manually from the XPro trigger mounted on the camera, but would not offer TTL automatic flash support: TTL Speedlite Flashes Godox VING V860IIS TTL Li-Ion Flash Godox TT685S Thinklite TTL Flash Manual Speedlite Flash Godox TT600 Thinklite Flash TTL Bare-Bulb Flashes Godox AD360II-N WITSTRO TTL Portable Flash Godox AD200 TTL Pocket Flash Kit TTL Studio Strobes Godox AD400Pro Witstro All-In-One Outdoor Flash Godox AD600Pro Witstro All-In-One Outdoor Flash Godox AD600B Witstro TTL All-In-One Outdoor Flash Godox Gemini GS200II 200Ws Monolight Godox Gemini GS300II 300Ws Monolight Godox Gemini GS400II 400Ws Monolight Manual Studio Strobes Godox AD600BM Witstro Manual All-In-One Outdoor Flash Godox DP300II Flash Head Godox DP400II Flash Head Godox DP800II Flash Head Godox DP1000II Flash Head Godox QS400II Flash Head Godox QS600II Flash Head Godox QS800II Flash Head Godox QS1200II Flash Head Godox QT400IIM Flash Head Godox QT600IIM Flash Head Godox QT1200IIM Flash Head Godox SK300II Studio Strobe Godox SK400II Studio Strobe

Q: 2. Is it safe to assume that No Sony Adapter is needed for this flash trigger?

A: Yes. The following system is designed and made for Sony.

Q: 3. How different is it from Broncolor RFS 2.2 N Transceiver for Nikon?

A: This transmitter can only fire the Godox shoe mount flash and monolights which have their X series receiver built into it or with an X1R receiver attached to it. The Broncolor RFS 2.2N only works on the frequency of the Broncolor RFS system in their flash heads.

Q: 4. Is the Godox XPRoO TTL Wireless Flash Trigger compatible with Godox TT350O?

A: According to the B&H website, it is. I love this system and how easy it is to operate.

Q: 5. Can you update the firmware on this unit using an apple computer? - I don't have access to PC

A: Yes, it should be possible to update the firmware of the Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras using a macOS computer with Catalina or later.

Q: 6. Im using a Yongnuo YN622C-TX in a 5D Mark III. I need better performance in lowlight (AF Light assist) is this Godox better on the AF assist?

A: It's about the same as the yongnuo

Q: 7. Can it be used with the Olympus FL-900R flash?

A: This is to trigger the Flashpoint or Godox flashes from a Olympus camera. It most likely will not talk to you Olympus hot-shoe flashes. You'll notice they have these triggers for Canon, Nikon, Sony. It's really to indicate compatibility with the camera to the Godox/Flshpoint lights.

Q: 8. Is this trigger compatible with the Sony a6400?

A: Yes, the following system will work with Sony protocol system.

Q: 9. Will this trigger work with the X1R-S on a Bolt VB-22, either shoe-mounted or PC sync? I'm sure it will fire but will it enable the VB-22 for HSS?

A: While you can sync a Bolt VB-22 with a Godox X1R-S attached via PC sync, it will not allow for HSS. The flash would need to be TTL compatible in order to incorporate HSS, which VB-22 is not.

Q: 10. Assuming that it has PC cord output, can it handle a 250V sync voltage as on a Vivitar 283 flash?

A: The Westcott FJ-X3 S Wireless Flash Trigger for Sony Cameras is a transmitter only for a camera's hot shoe. The port on it is for charging, and it does not work as a receiver for flashes. There is a manual receiver available, but it cannot handle 250V.