The cocoa Countryman E6X Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 3.5mm locking Connector for Sony Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 3.5mm locking connector for direct connection to Sony ZTX-B01 and ZTX-B02RC wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sony Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does it have an AF assist?

A: It depends on the camera, But yes it does support focus assist. …it’s listed on page 3 of the PDF Manual on our site.

Q: 2. what godox flash is compatible with godox xpro ttl for pentax k3?

A: If you wish to use the flash on-camera, the Godox TT350P Mini Thinklite TTL Flash for Pentax Cameras, B&H # GOTT350P, is the only Godox flash we carry that is listed as compatible for use with Pentax's TTL automatic exposure system. However, if you plan to use the flash wirelessly off-camera with the Godox XProP TTL Wireless Flash Trigger for Pentax Cameras mounted to the camera's hot shoe, then you may use any Godox flash that has their X-Wireless Radio System built inside, as Godox's flashes with their X-Wireless Radio System have cross-brand platform support when used wirelessly. As such, you could use a Godox flash designed for another camera brand for off-camera usage, such as the TTL flashes listed below. The manual flashes I have also listed below would be compatible for use with the Godox XProP TTL Wireless Flash Trigger for Pentax Cameras and would allow you to set the flash output power manually from the XPro trigger mounted on the camera, but would not offer TTL automatic flash support: TTL Speedlite Flashes Godox VING V860IIS TTL Li-Ion Flash Godox TT685S Thinklite TTL Flash Manual Speedlite Flash Godox TT600 Thinklite Flash TTL Bare-Bulb Flashes Godox AD360II-N WITSTRO TTL Portable Flash Godox AD200 TTL Pocket Flash Kit TTL Studio Strobes Godox AD400Pro Witstro All-In-One Outdoor Flash Godox AD600Pro Witstro All-In-One Outdoor Flash Godox AD600B Witstro TTL All-In-One Outdoor Flash Godox Gemini GS200II 200Ws Monolight Godox Gemini GS300II 300Ws Monolight Godox Gemini GS400II 400Ws Monolight Manual Studio Strobes Godox AD600BM Witstro Manual All-In-One Outdoor Flash Godox DP300II Flash Head Godox DP400II Flash Head Godox DP800II Flash Head Godox DP1000II Flash Head Godox QS400II Flash Head Godox QS600II Flash Head Godox QS800II Flash Head Godox QS1200II Flash Head Godox QT400IIM Flash Head Godox QT600IIM Flash Head Godox QT1200IIM Flash Head Godox SK300II Studio Strobe Godox SK400II Studio Strobe

Q: 3. Will Godox X PRO N WORK WITH A COLD SHOE BAR OR DOES IT NEED A ON CAMERA HOT SHOE CONNECTION?

A: The transmitter requires a hotshoe for communication.

Q: 4. Is this trigger compatible with the Sony a6400?

A: Yes, the following system will work with Sony protocol system.

Q: 5. Will this trigger work with the X1R-S on a Bolt VB-22, either shoe-mounted or PC sync? I'm sure it will fire but will it enable the VB-22 for HSS?

A: While you can sync a Bolt VB-22 with a Godox X1R-S attached via PC sync, it will not allow for HSS. The flash would need to be TTL compatible in order to incorporate HSS, which VB-22 is not.

Q: 6. Im using a Yongnuo YN622C-TX in a 5D Mark III. I need better performance in lowlight (AF Light assist) is this Godox better on the AF assist?

A: It's about the same as the yongnuo

Q: 7. does this trigger any Westcott light?

A: Yes, the Westcott FJ-X3 S Wireless Flash Trigger and drive the following units. Bolt VS-260 Metz M360 Nissin i400 Opteka IF500 Westcott FJ-XR Westcott FJ200 Westcott FJ400 Westcott FJ80 Westcott FJ80 and FJ400 Strobe Westcott Fj200

Q: 8. Can you update the firmware on this unit using an apple computer? - I don't have access to PC

A: Yes, it should be possible to update the firmware of the Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras using a macOS computer with Catalina or later.

Q: 9. How do you set these up to do stroboscopic Flash?

A: Please follow the following steps 1. In the multi flash (TTL and M icon are not displayed). 2. The three lines are separately displayed as power output value, Times(flash times) and Hz (flash frequency). 3. Turn the Select Dial to change the power output value from Min. to 1/4 in integer stops. 4. Short press the Times button can change flash times. Turn the select dial to change the setting value. 5. Short press the Hz button can change flash frequency. Turn the select dial to change the setting value 6. Until all the amounts are set. Or during any value setting, short press the MODE button to exit the setting status. No values will blink. 7. In the multi flash setting submenu, short press the MODE button to return to main menu when no values are blinking

Q: 10. How different is it from Broncolor RFS 2.2 N Transceiver for Nikon?

A: This transmitter can only fire the Godox shoe mount flash and monolights which have their X series receiver built into it or with an X1R receiver attached to it. The Broncolor RFS 2.2N only works on the frequency of the Broncolor RFS system in their flash heads.