The light beige Countryman E6X Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and LEMO 3-pin Connector for WisyCom Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40S, MTP41, and MTP41S wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    WisyCom Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. What is the smallest photo this will print?

A: The smallest paper this printer takes is 4 x 6. although you can print smaller images on the paper & trim it down.

Q: 2. How does the 1 year limited warranty work when the unit stops working?

A: If youre not outside of the warranty, contact the manufacturer for replacement.

Q: 3. Fuji x t-4 compatibility?

A: This is compatible with the XT-4.

Q: 4. Will this transmitter be compatible with non-Godox flashes? (Yongnuo, Nikon, Bolt)

A: While Godox only guarantees full compatibility with Godox flashes and Nikon i-TTL flashes, if the third-party flash you own or are considering purchasing use Nikon's i-TTL automatic flash system, it should also be compatible with the Godox X1T-N TTL Wireless Flash Trigger Transmitter for Nikon. If it is a non-Nikon i-TTL flash, then you would have to set the flash output manually on the flash, as it will not automatically be set or controlled by the Godox transmitter. You will need the Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon, B&H # GOX1RN, for the off-camera flashes as the wireless receiver, and the Godox X1T-N TTL Wireless Flash Trigger Transmitter for Nikon on the camera as the wirelesss transmitter

Q: 5. I have a Canon 7D and was wondering if I can use the pop-up flash on the camera to trigger the YN685? It works with my YN560, but I can't find anything about triggering the YN685 in slave mode with another flash.

A: No, the YN685 only has a radio sync system. It does not have an optical one to work with the popup flash on the Canon 7D.

Q: 6. The YN685N specs say that it has 7 channels and 6 groups. However: 1. on mine only groups A,B andC are shown 2.the 622TX only shows groups A,B and C. How do I get access to control groups D and E?

A: You only have 6 groups and 16 channels when the flash is in 603 slave mode. Otherwise there are only 3 groups and 7 channels in all other modes that support groups/channels.

Q: 7. Is this compatible with v350c?

A: Yes you can use a V350C off camera with this transmitter on the camera.

Q: 8. Will this be compatible with both Nissin Di700A and i60A for MFT?

A: Yes it will once released. There are some advanced features on the new Air 10s that are designed for future flashes so some of the features will not work, but you will be able to get some additional features by using the Air 10s.

Q: 9. Does Nikon SU-800 work high speed sync photography ?

A: Yes it does. (i actually bought it for that) Check check also the flash model you are using just to make sure that it does high speed and is compatible with the su-800

Q: 10. Is it compatible with Nikon Df?

A: It should. The specs for the Df show that it supports Nikon iTTL flash and I noticed that Nikon Speed lights are recommended accessories. So the YN685 should be compatible.