The cocoa Countryman E6X Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 3.5mm Connector for Amplivox Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 3.5mm connector for direct connection to Amplivox S-1600T and S-1690T wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Amplivox Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does Nikon SU-800 work high speed sync photography ?

A: Yes it does. (i actually bought it for that) Check check also the flash model you are using just to make sure that it does high speed and is compatible with the su-800

Q: 2. Can I use a remote shutter release while using the SU-800 Wireless Speedlight Commander Unit ? I want remote shutter and wireless flash at the same time.

A: Yes a remote shutter release can be used while this SU-800 is on the camera.

Q: 3. I used my YN685 for the first time this weekend with Duracell 2500 mha rechargeable batteries and after 84 pops in TTL mode the flash told me that the batteries were dead and needed to replace them. I had to go back to the SB800 where I get around 500 pops in TTL mode with the same batteries. Is this a normal function with this flash or is it defective? Also, I recharged the batteries I used in the YN685 and my Maha 8000 charger and it told me that only 500 mha were used out of the 2500 whereas the same batteries out of the SB800 were charged to 2500 which meant that I used them completely. Do I need to return the the unit and get a replacement?

A: You might want to try Panasonic eneloop batteries. I have used them in my YN-685 and YN-560IV and YN-568EX without an issue.

Q: 4. does this work with nikon d7200

A: Yes, the Yongnuo YN685 Wireless TTL Speedlite and Wireless Flash Controller Kit for Nikon Cameras would be compatible for use with the Nikon D7200 DSLR camera.

Q: 5. Can this be triggered by a V1 or a 860iii flash unit on top of the camera or do i need a separate compatible transmitter?

A: Godox tt685, V860 and V1 can all be used as a transmitter to control a Godox X1R-C TTL Wireless Flash Receiver for Canon BH #GOX1RC.

Q: 6. I have a canon eos sl3. This camera doesn't have the center contact for it to work with normal strobe syncs. If I get this, would it work fine and would I need to get a reserve as well?

A: This X1T-C would already have the current firmware in order to be compatible with the Canon EOS SL3. As for getting a reserve X1T-C unit, that would be a wise decision in case the primary unit fails during use.

Q: 7. Does it work with Nikon SB700 & nIKON SB5000?

A: Unfortunately, this Air10S Commander will not fire the SB-700 or SB5000 as Nissin no longer produces a Nikon compatible receiver.

Q: 8. I have a Canon 7D and was wondering if I can use the pop-up flash on the camera to trigger the YN685? It works with my YN560, but I can't find anything about triggering the YN685 in slave mode with another flash.

A: No, the YN685 only has a radio sync system. It does not have an optical one to work with the popup flash on the Canon 7D.

Q: 9. Can I put the transmitter on a Nikon z50 and fire a Nikon d500 with receiver attached?

A: If you have the Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon connected to the remote terminal on the Nikon D500 DSLR camera via the included N1 Camera Sync Cable, and you have the Godox X1T-N TTL Wireless Flash Trigger Transmitter for Nikon connected to the Nikon Z50 Mirrorless Digital Camera and both remotes are set to the same channel/group, then yes, triggering the Nikon Z50 should also wirelessly trigger the Nikon D500.

Q: 10. Is there a 1/2 button press that could start pro capture?

A: The OM SYSTEM RM-WR1 Wireless Remote Control does have the option to half-press to focus when in photo mode.