The cocoa Countryman E6X Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and TA4F Connector for Shure Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a TA4F connector for direct connection to Shure MXW1 and MXW1/0=-Z11 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Shure Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Works with Sony a7iii with Sony HVL F60M?

A: It will transmit the signal in Godox's language, so you'll need the Godox X1R-S to receive that signal. The HVL-F60M will need to be mounted on the X1R-S: https://bhpho.to/2PTcf2p Note: Please push the TEST button on the transmitter when you have completed your changes in settings on the X1T-S transmitter in order to transmit any changes to the X1R-S receiver.

Q: 2. How different is it from Broncolor RFS 2.2 N Transceiver for Nikon?

A: This transmitter can only fire the Godox shoe mount flash and monolights which have their X series receiver built into it or with an X1R receiver attached to it. The Broncolor RFS 2.2N only works on the frequency of the Broncolor RFS system in their flash heads.

Q: 3. Will this allow me to use my Speedlite 470ex-ai wirelessly one my softbox off camera?

A: Yes this will allow you to use a Canon 470EX-AI off camera.

Q: 4. Nissin Air 10s wireless TTL Commander will be available in versions for different camera bodies: I own Nikon (D810) & Fuji (X-H1, X-Pro2) cameras will I need 2 camera-specific Nissin Air 10s Controllers?

A: In order to have the proper TTL communication between the flash and the camera, you would need the Air 10S Commander specific to the camera you are using.

Q: 5. I have El Capitan operating system - is this printer compatible?

A: It works with both, my MacBook Pro laptop and Mini, yes! Now, the ink is another issue, it would not last long if you use the printer once a week/month. In between, it just dries out. Every day use, that's OK. Big prints - amazing!

Q: 6. Will this controller work with YN622 cII transeivers?

A: The YN685 flash comes with builtin Transceiver that works with YN622 model, you dont need an additional transceiver

Q: 7. Will this trigger the Godox TT685S off camera?

A: Yes, it will work.

Q: 8. Will the Godox X1R-N TTL wireless flash trigger receiver work with a Nikon D7200?

A: No this is a receiver only made for flash use you need to use the transmitter on your camera X1T

Q: 9. Can I put the transmitter on a Nikon z50 and fire a Nikon d500 with receiver attached?

A: If you have the Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon connected to the remote terminal on the Nikon D500 DSLR camera via the included N1 Camera Sync Cable, and you have the Godox X1T-N TTL Wireless Flash Trigger Transmitter for Nikon connected to the Nikon Z50 Mirrorless Digital Camera and both remotes are set to the same channel/group, then yes, triggering the Nikon Z50 should also wirelessly trigger the Nikon D500.

Q: 10. Does it work with Nikon SB700 & nIKON SB5000?

A: Unfortunately, this Air10S Commander will not fire the SB-700 or SB5000 as Nissin no longer produces a Nikon compatible receiver.