The light beige Countryman E6X Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 3.5mm locking Connector for Happie Amp or Empower Sound Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 3.5mm locking connector for direct connection to Happie Amp or Empower Sound and Amazing Amp wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Happie Amp or Empower Sound Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Just received the YN 685 Flash. Mine has a lot of grease at the pivot joint (where the flash head totates). Is that normal? Is it supposed to have grease there?

A: The one I recieved doesn't have grease there. I don't know if it's supposed to or not. That doesn't sound normal but I can't say for sure. As far as performance, the YN 685 is a great flash for the price. If the grease issue is a significant problem I would contact B&H, they have great customer service.

Q: 2. Any ideas how to use this transmiter and nikon su800 on top of it i want to use 2 godox ad200 with nikon sb910 and sb800 The godox ad 200 is fireing The nikons no

A: You must have a Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon B&H # GOX1RN on the Nikon SB-910 placed off camera so that it can fire with the AD200, while the X1T-N is on camera with the SB-800. https://bhpho.to/2gvAXHk

Q: 3. How different is it from Broncolor RFS 2.2 N Transceiver for Nikon?

A: This transmitter can only fire the Godox shoe mount flash and monolights which have their X series receiver built into it or with an X1R receiver attached to it. The Broncolor RFS 2.2N only works on the frequency of the Broncolor RFS system in their flash heads.

Q: 4. Will this be compatible with both Nissin Di700A and i60A for MFT?

A: Yes it will once released. There are some advanced features on the new Air 10s that are designed for future flashes so some of the features will not work, but you will be able to get some additional features by using the Air 10s.

Q: 5. Is there a 1/2 button press that could start pro capture?

A: The OM SYSTEM RM-WR1 Wireless Remote Control does have the option to half-press to focus when in photo mode.

Q: 6. Can I use one piece of Yn-685 as a master to fire another slave Yn-685?

A: Unfortunately this flash is just a slave. You can purchase a transmitter, like the Yongnuo YN-622N, YN-622N-TX, YN560-TX, RF-605, RF-603 III, and RF-603 or you can use a YN560 flash on camera to trigger the 685.

Q: 7. Nissin Air 10s wireless TTL Commander will be available in versions for different camera bodies: I own Nikon (D810) & Fuji (X-H1, X-Pro2) cameras will I need 2 camera-specific Nissin Air 10s Controllers?

A: In order to have the proper TTL communication between the flash and the camera, you would need the Air 10S Commander specific to the camera you are using.

Q: 8. Is this compatible with v350c?

A: Yes you can use a V350C off camera with this transmitter on the camera.

Q: 9. Will this transmitter be compatible with non-Godox flashes? (Yongnuo, Nikon, Bolt)

A: While Godox only guarantees full compatibility with Godox flashes and Nikon i-TTL flashes, if the third-party flash you own or are considering purchasing use Nikon's i-TTL automatic flash system, it should also be compatible with the Godox X1T-N TTL Wireless Flash Trigger Transmitter for Nikon. If it is a non-Nikon i-TTL flash, then you would have to set the flash output manually on the flash, as it will not automatically be set or controlled by the Godox transmitter. You will need the Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon, B&H # GOX1RN, for the off-camera flashes as the wireless receiver, and the Godox X1T-N TTL Wireless Flash Trigger Transmitter for Nikon on the camera as the wirelesss transmitter

Q: 10. Does this product have high speed sync?

A: Yes, if you are shooting in shutter preferred mode with this device, it will support high speed sync.