The light beige Countryman E6X Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 2.5mm locking Connector for Comtek Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 2.5mm locking connector for direct connection to Comtek M-216 and M-72 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Comtek Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is this compatible with v350c?

A: Yes you can use a V350C off camera with this transmitter on the camera.

Q: 2. Will the Godox X1R-N TTL wireless flash trigger receiver work with a Nikon D7200?

A: No this is a receiver only made for flash use you need to use the transmitter on your camera X1T

Q: 3. Does this product have high speed sync?

A: Yes, if you are shooting in shutter preferred mode with this device, it will support high speed sync.

Q: 4. Can I use it with Godox TT685S 2.4G HSS 1/8000S TTL GN60 Flash Speedlite on Sony a7 iii? Do I need to buy a receiver also?

A: With using a current Godox Flash no extra receiver needed as they have built in radio receivers

Q: 5. Does this transmitter allow for High Speed Sync?

A: Yes it can do HSS up to 1/8000th or the limits of the camera.

Q: 6. Will this be compatible with both Nissin Di700A and i60A for MFT?

A: Yes it will once released. There are some advanced features on the new Air 10s that are designed for future flashes so some of the features will not work, but you will be able to get some additional features by using the Air 10s.

Q: 7. Will this transmitter be compatible with non-Godox flashes? (Yongnuo, Nikon, Bolt)

A: While Godox only guarantees full compatibility with Godox flashes and Nikon i-TTL flashes, if the third-party flash you own or are considering purchasing use Nikon's i-TTL automatic flash system, it should also be compatible with the Godox X1T-N TTL Wireless Flash Trigger Transmitter for Nikon. If it is a non-Nikon i-TTL flash, then you would have to set the flash output manually on the flash, as it will not automatically be set or controlled by the Godox transmitter. You will need the Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon, B&H # GOX1RN, for the off-camera flashes as the wireless receiver, and the Godox X1T-N TTL Wireless Flash Trigger Transmitter for Nikon on the camera as the wirelesss transmitter

Q: 8. What is the difference between this trigger (the "Godox X1T-S TTL Wireless Flash Trigger Transmitter for Sony") and the "Godox X2 2.4 GHz TTL Wireless Flash Trigger for Sony"?

A: The Godox X2 is an updated transmitter which now adds Bluetooth functionality to sync up with a Godox app for Android and iOS devices. This app controls the power levels of your flash and the modes offered on the transmitter.

Q: 9. Nissin Air 10s wireless TTL Commander will be available in versions for different camera bodies: I own Nikon (D810) & Fuji (X-H1, X-Pro2) cameras will I need 2 camera-specific Nissin Air 10s Controllers?

A: In order to have the proper TTL communication between the flash and the camera, you would need the Air 10S Commander specific to the camera you are using.

Q: 10. Does the ML-L3 remote come with a case/cover?

A: Yes it does come with a nice canvas cover which has slots to attach to the camera shoulder strap.