The black Countryman E6 Directional Earset Mic, Low Gain with Detachable 2mm Cable and 4-Pin Hirose Connector for Azden Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 4-pin Hirose connector for direct connection to Azden UHF 41BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this trigger the Godox TT685S off camera?

A: Yes, it will work.

Q: 2. Will this controller work with YN622 cII transeivers?

A: The YN685 flash comes with builtin Transceiver that works with YN622 model, you dont need an additional transceiver

Q: 3. Do I need to purchase the receiver in addition if using with a Godox TT350C?

A: No, you do not need a receiver attached to the TT350C. It has a built-in receiver and transmitter.

Q: 4. does this work with nikon d7200

A: Yes, the Yongnuo YN685 Wireless TTL Speedlite and Wireless Flash Controller Kit for Nikon Cameras would be compatible for use with the Nikon D7200 DSLR camera.

Q: 5. I use my Sony A7III with the Sony FA-WRC1M transmitter to fire my Sony HVL-F60RM. I want to add to this set a Godox AD200Pro. Is it possible to use the AD200Pro with this Godox X1R-S receiver and shoot with the Sony FA-WRC1M?

A: Unfortunately, the FA-WRC1M can only fire flashes that are equipped with a Sony FA-WRR1 Wireless Radio Receiver or have a Sony wireless receiver built in. The Godox X1 series works on a different frequency.

Q: 6. Must you be in line of site? What if I want to use pocket wizards? Can I just stick it on the trigger mounted to a camera and use it to control the remote flashes?

A: The best answer is yes, you have to be in line of sight. But the complete truth is that, in a smaller room, it's rather forgiving. But if you are trying to truly turn a corner or put your flash on the far side of a wall, you're in trouble.

Q: 7. I have the godox x1T ttl and the godox V860II-N. Do I need a godox x1r-N ttl as well?

A: No, what you have will work together.

Q: 8. What is the difference between this trigger (the "Godox X1T-S TTL Wireless Flash Trigger Transmitter for Sony") and the "Godox X2 2.4 GHz TTL Wireless Flash Trigger for Sony"?

A: The Godox X2 is an updated transmitter which now adds Bluetooth functionality to sync up with a Godox app for Android and iOS devices. This app controls the power levels of your flash and the modes offered on the transmitter.

Q: 9. Work with SB 900, SB 28?

A: The Nikon SU-800 Wireless Speedlight Commander Unit is only compatible for use with the SB-910, SB-900, SB-800, SB-700, SB-600, SB-500, SB-5000 and SB-R200 Speedlight units. It would not be compatible for use with the Nikon SB-28 Speedlight Flash.

Q: 10. Will this transmitter be compatible with non-Godox flashes? (Yongnuo, Nikon, Bolt)

A: While Godox only guarantees full compatibility with Godox flashes and Nikon i-TTL flashes, if the third-party flash you own or are considering purchasing use Nikon's i-TTL automatic flash system, it should also be compatible with the Godox X1T-N TTL Wireless Flash Trigger Transmitter for Nikon. If it is a non-Nikon i-TTL flash, then you would have to set the flash output manually on the flash, as it will not automatically be set or controlled by the Godox transmitter. You will need the Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon, B&H # GOX1RN, for the off-camera flashes as the wireless receiver, and the Godox X1T-N TTL Wireless Flash Trigger Transmitter for Nikon on the camera as the wirelesss transmitter