The cocoa Countryman E6X Directional Earset Mic, Low Gain with Detachable 1mm Cable and LEMO 4-pin Connector for Beyerdynamic Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6X earset's cable terminates to a LEMO 4-pin connector for direct connection to Beyerdynamic TS 316, TS 400, and TS 600 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Beyerdynamic Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. How different is it from Broncolor RFS 2.2 N Transceiver for Nikon?

A: This transmitter can only fire the Godox shoe mount flash and monolights which have their X series receiver built into it or with an X1R receiver attached to it. The Broncolor RFS 2.2N only works on the frequency of the Broncolor RFS system in their flash heads.

Q: 2. Any ideas how to use this transmiter and nikon su800 on top of it i want to use 2 godox ad200 with nikon sb910 and sb800 The godox ad 200 is fireing The nikons no

A: You must have a Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon B&H # GOX1RN on the Nikon SB-910 placed off camera so that it can fire with the AD200, while the X1T-N is on camera with the SB-800. https://bhpho.to/2gvAXHk

Q: 3. Can it be use in canon speedlight 470exai

A: You would need this receiver and a X1 or XPro transmitter on the camera.

Q: 4. Will this work with z6ii and sb 5000?

A: Yes, the Nikon SU-800 Wireless Speedlight Commander Unit is compatible with both Nikon Z6 II Mirrorless Cameras as well as the Nikon SB-5000 AF Speedlights.

Q: 5. Will this transmitter be compatible with non-Godox flashes? (Yongnuo, Nikon, Bolt)

A: While Godox only guarantees full compatibility with Godox flashes and Nikon i-TTL flashes, if the third-party flash you own or are considering purchasing use Nikon's i-TTL automatic flash system, it should also be compatible with the Godox X1T-N TTL Wireless Flash Trigger Transmitter for Nikon. If it is a non-Nikon i-TTL flash, then you would have to set the flash output manually on the flash, as it will not automatically be set or controlled by the Godox transmitter. You will need the Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon, B&H # GOX1RN, for the off-camera flashes as the wireless receiver, and the Godox X1T-N TTL Wireless Flash Trigger Transmitter for Nikon on the camera as the wirelesss transmitter

Q: 6. Work with SB 900, SB 28?

A: The Nikon SU-800 Wireless Speedlight Commander Unit is only compatible for use with the SB-910, SB-900, SB-800, SB-700, SB-600, SB-500, SB-5000 and SB-R200 Speedlight units. It would not be compatible for use with the Nikon SB-28 Speedlight Flash.

Q: 7. Does this flash also have an optical slave trigger?

A: No, but the YN568 does. I have 4 of those and 3 of the YN685.Love all of these!

Q: 8. Can I use it with Godox TT685S 2.4G HSS 1/8000S TTL GN60 Flash Speedlite on Sony a7 iii? Do I need to buy a receiver also?

A: With using a current Godox Flash no extra receiver needed as they have built in radio receivers

Q: 9. Can I use one piece of Yn-685 as a master to fire another slave Yn-685?

A: Unfortunately this flash is just a slave. You can purchase a transmitter, like the Yongnuo YN-622N, YN-622N-TX, YN560-TX, RF-605, RF-603 III, and RF-603 or you can use a YN560 flash on camera to trigger the 685.

Q: 10. Can I put the transmitter on a Nikon z50 and fire a Nikon d500 with receiver attached?

A: If you have the Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon connected to the remote terminal on the Nikon D500 DSLR camera via the included N1 Camera Sync Cable, and you have the Godox X1T-N TTL Wireless Flash Trigger Transmitter for Nikon connected to the Nikon Z50 Mirrorless Digital Camera and both remotes are set to the same channel/group, then yes, triggering the Nikon Z50 should also wirelessly trigger the Nikon D500.