The cocoa Countryman E6X Directional Earset Mic, Low Gain with Detachable 2mm Cable and LEMO 6-pin Connector for Micron Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6X earset's cable terminates to a LEMO 6-pin connector for direct connection to Micron TX 700-Series wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Micron Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Can I put the transmitter on a Nikon z50 and fire a Nikon d500 with receiver attached?

A: If you have the Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon connected to the remote terminal on the Nikon D500 DSLR camera via the included N1 Camera Sync Cable, and you have the Godox X1T-N TTL Wireless Flash Trigger Transmitter for Nikon connected to the Nikon Z50 Mirrorless Digital Camera and both remotes are set to the same channel/group, then yes, triggering the Nikon Z50 should also wirelessly trigger the Nikon D500.

Q: 2. Will this work with z6ii and sb 5000?

A: Yes, the Nikon SU-800 Wireless Speedlight Commander Unit is compatible with both Nikon Z6 II Mirrorless Cameras as well as the Nikon SB-5000 AF Speedlights.

Q: 3. Any ideas how to use this transmiter and nikon su800 on top of it i want to use 2 godox ad200 with nikon sb910 and sb800 The godox ad 200 is fireing The nikons no

A: You must have a Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon B&H # GOX1RN on the Nikon SB-910 placed off camera so that it can fire with the AD200, while the X1T-N is on camera with the SB-800. https://bhpho.to/2gvAXHk

Q: 4. Do I need to purchase the receiver in addition if using with a Godox TT350C?

A: No, you do not need a receiver attached to the TT350C. It has a built-in receiver and transmitter.

Q: 5. Works with Sony a7iii with Sony HVL F60M?

A: It will transmit the signal in Godox's language, so you'll need the Godox X1R-S to receive that signal. The HVL-F60M will need to be mounted on the X1R-S: https://bhpho.to/2PTcf2p Note: Please push the TEST button on the transmitter when you have completed your changes in settings on the X1T-S transmitter in order to transmit any changes to the X1R-S receiver.

Q: 6. Does it work with HVL-F45RM flash?

A: Unfortunately, the Air10S Commander cannot work with the HVL-F45RM. A more suitable commander is the Sony FA-WRC1M Wireless Radio Commander B&H # SOFAWRC1M.

Q: 7. will the odox X1T-F TTL Wireless Flash Trigger Transmitter for Fujifilm work on the XPro1 ?

A: Yes, the Fujifilm X-Pro1 is listed as compatible for use with the Godox X1T-F TTL Wireless Flash Trigger Transmitter for Fujifilm, B&H # GOX1TF. However, do note that on Godox's webpage, they state Fuji cameras are divided into three kinds according to their different ways to control flash. The X-Pro1 is in their B category, and it will be compatible with Standard TTL and Manual flash, as well as standard Stroboscopic Flash capabilities when using the X1T-F wireless trigger. It will not have rear-curtain sync or High-Speed Sync (Focal Plane Sync) capabilities, and the AF-Assist Beam will not illuminate when using the X-Pro1 (or X-T10, X-E1, or X-A3 cameras, all which have similar performance as the X-Pro1 with the Godox X1T-F TTL Wireless Flash Trigger Transmitter for Fujifilm).

Q: 8. Im currently using the Godox SK400II Studio Strobes and was hoping this transmitter would change the power of the strobe for me as in my tight space I can't easily reach the strobe on my boom. Will this do that?

A: Yes you can control the power from the trigger

Q: 9. I use my Sony A7III with the Sony FA-WRC1M transmitter to fire my Sony HVL-F60RM. I want to add to this set a Godox AD200Pro. Is it possible to use the AD200Pro with this Godox X1R-S receiver and shoot with the Sony FA-WRC1M?

A: Unfortunately, the FA-WRC1M can only fire flashes that are equipped with a Sony FA-WRR1 Wireless Radio Receiver or have a Sony wireless receiver built in. The Godox X1 series works on a different frequency.

Q: 10. Is this compatible with the Canon 430EX iii-RT speedlight?

A: It is not directly compatible. You would need a receiver to make it work. https://bhpho.to/2LEUdzx