You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6 Omni Earset Mic, Medium Gain, With Detachable 1mm Cable And Lemo 3-pin Connector For Sennheiser Wireless Transmitters (cocoa)

Countryman E6 Omni Earset Mic, Medium Gain, With Detachable 1mm Cable And Lemo 3-pin Connector For Sennheiser Wireless Transmitters (cocoa)
  • Product Code: ga253558
  • Availability: In Stock

$1,740.00 $2,453.40

The cocoa E6 Omnidirectional Earset Mic, Medium Gain, with Detachable 1mm Cable and LEMO 3-Pin Connector for Sennheiser Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It is a water- and wind-resistant microphone that can be used on either ear for capturing audio in houses of worship, theater, or outdoor vocal and speech applications.

The low-profile, omnidirectional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features three omni caps (very bright +8 dB, bright +4 dB, and flat +0 dB) that deliver response characteristics for most other applications such as recording flute and violin. The E6 Earset is available as a directional microphone too with cardioid and hypercardioid caps. This omnidirectional E6 Earset's cable terminates to a LEMO 3-pin connector for direct connection to a Sennheiser SK 2000 wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 1mm Cable    LEMO 3-Pin (S2), See Description    20 Hz to 20 kHz Frequency Response    Headroom for Strong Vocals    Includes +8, +4, and +0 dB EQ Caps    Windscreen    Cable Clips    Carrying Case

Key Specs
Compatible TransmittersLectrosonics: SSM
Sennheiser: SK2000
Polar PatternOmnidirectional
Frequency Response20 Hz to 20 kHz
Maximum SPL130 dB
SensitivityW6/6/Mid Gain for Speaking and Vocals (H6, E6, EM6, EM2)
Analog Output1x LEMO 3-Pin
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersLectrosonics: SSM
Sennheiser: SK2000
Polar PatternOmnidirectional
Included Tone/Pattern Caps+4 dB Bright, +0 dB Flat, +8 dB Very Bright
Performance
Frequency Response20 Hz to 20 kHz
Maximum SPL130 dB
Sensitivity2 mV/Pa
SensitivityW6/6/Mid Gain for Speaking and Vocals (H6, E6, EM6, EM2)
Equivalent Noise Level29 dB (A-Weighted)
Connectivity
Analog Output1x LEMO 3-Pin
Cable Length5' / 1.52 m
Cable Diameter0.039" / 1 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorCocoa
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g
Packaging Info
Package Weight0.5 lb
Box Dimensions (LxWxH)10 x 10 x 2"

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 140 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 140 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For speaking and vocals.

Related Questions and Answers

Q: 1. Will this work with the Sony A7 riii?

A: Yes.

Q: 2. Will this be compatible with both Nissin Di700A and i60A for MFT?

A: Yes it will once released. There are some advanced features on the new Air 10s that are designed for future flashes so some of the features will not work, but you will be able to get some additional features by using the Air 10s.

Q: 3. Will this work with z6ii and sb 5000?

A: Yes, the Nikon SU-800 Wireless Speedlight Commander Unit is compatible with both Nikon Z6 II Mirrorless Cameras as well as the Nikon SB-5000 AF Speedlights.

Q: 4. Will this transmitter be compatible with non-Godox flashes? (Yongnuo, Nikon, Bolt)

A: While Godox only guarantees full compatibility with Godox flashes and Nikon i-TTL flashes, if the third-party flash you own or are considering purchasing use Nikon's i-TTL automatic flash system, it should also be compatible with the Godox X1T-N TTL Wireless Flash Trigger Transmitter for Nikon. If it is a non-Nikon i-TTL flash, then you would have to set the flash output manually on the flash, as it will not automatically be set or controlled by the Godox transmitter. You will need the Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon, B&H # GOX1RN, for the off-camera flashes as the wireless receiver, and the Godox X1T-N TTL Wireless Flash Trigger Transmitter for Nikon on the camera as the wirelesss transmitter

Q: 5. Does it work with Nikon SB700 & nIKON SB5000?

A: Unfortunately, this Air10S Commander will not fire the SB-700 or SB5000 as Nissin no longer produces a Nikon compatible receiver.

Q: 6. Will this trigger both the Canon 6000EXll-RT and EL-1?

A: Yes, the Godox X1R-C TTL Wireless Flash Trigger is compatible with both Canon E-TTL / E-TTL II protocol systems.

Q: 7. Does this flash also have an optical slave trigger?

A: No, but the YN568 does. I have 4 of those and 3 of the YN685.Love all of these!

Q: 8. I have a Godox X2-N trigger, a Godox V1 and looking purchasing a Sekonic L308X-U light meter. Can a Godox X1R-N be used in combination with the Sekonic L308X-U to trigger the V1 to capture the exposure settings?

A: You could do it with a transmitter https://bhpho.to/2KmsMZn but not the receiver.

Q: 9. Can this be used to trigger a camera?

A: Yes it can.

Q: 10. I use my Sony A7III with the Sony FA-WRC1M transmitter to fire my Sony HVL-F60RM. I want to add to this set a Godox AD200Pro. Is it possible to use the AD200Pro with this Godox X1R-S receiver and shoot with the Sony FA-WRC1M?

A: Unfortunately, the FA-WRC1M can only fire flashes that are equipped with a Sony FA-WRR1 Wireless Radio Receiver or have a Sony wireless receiver built in. The Godox X1 series works on a different frequency.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Products You May Like

Serato Sample 1.0 Plug-in

$477.00 $596.25

Garmin Dash Cam Mini 2

$358.47 $566.38

Owc Mercury Pro Lto-9 Tape Storage Drive

$18,599.97 $22,691.96

Jason Cases Birddog P4k Robos Case

$1,947.00 $2,433.75

Heliopan 52-58mm Step-up Ring (#182)

$70.47 $101.48