The Countryman E6i Omnidirectional Microphone is a miniature earset microphone for virtually invisible operation in stage performances, trade shows, houses-of-worship, auctions, lectures and much more.

The omnidirectional version is most common in applications where feedback issues are not very likely. The microphone can be worn without a windscreen as the omnidirectional capsule provides excellent wind noise rejection.

The E6i is set apart from the original E6 with its softer flexible boom and silicon ear-pads. The flexible boom provides ease of boom adjustability to accommodate multi-user applications.

A wide variety of colors and connections are available for use with various wireless transmitters. This version is black and features a 3-pin Lemo connector for Sennheiser transmitters.

3-pin Lemo for Sennheiser    2mm Diameter Duramax Cable    Optimized for Strong Vocals    Omnidirectional    Black

A miniature omnidirectional capsule is mounted to a low-profile, flexible frame with silicon ear pads. This lightweight, unobtrusive design is available in various colors that virtually render the entire microphone invisible against the skin. For more information on which color earset suits you best, refer to the Countryman support page.

The included 2mm Diameter Duramax Cable detaches from the actual headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available in a wide selection of connections to accommodate various wireless transmitters. The Duramax 2mm diameter cable provides extra strength, flexibility and durability.

The omnidirectional polar pattern is most effective in minimizing wind noise, plosives (popping) and handling noise. The flexible boom provides a custom fit for multiple users and close microphone positioning while minimizing off-axis noise. The E6i is also available in a cardioid version for maximum off-axis noise rejection in environments with high feedback and noise.

This E6i's sensitivity response is optimized to accurately capture strong vocals without noise and distortion. The high headroom is well suited for singers and performers in stage and broadcast applications.

Related Questions and Answers

Q: 1. Can someone with experience with both tell me how this head compares with the Sachtler FSB-6 head (not in specs, but actual use and performance)?

A: The biggest benefit on the Manfrotto head is the price to features value. Considering that the Nitrotech comes in at virtually one third of the price of the Sachtler, of course, if budgetary considerations are a primary factor, then the Manfrotto model makes perfect sense and is a very respectable option. Having said that, there are some "real life" comparisons out there in the forums world that would be very beneficial to consider, since as a impartial observers we can only comment on the obvious specs, as listed by each manufacturer, which is not the original intent of this inquiry.

Q: 2. Would this work on a manffrotto tripod?

A: Yes, as long as the Manfrotto tripod has a 1/4"-20 and/or 3/8"-16 screw, the Davis Sanford V9 Fluid Head is compatible.

Q: 3. Will it fit the Peak Design travel tripod?

A: Not really suggest as a bushing would have to be set in place in order to mount system. The following is needed in order to do so. Oben 3/8"-16 to 1/4"-20 Reducer Bushing BH #OB1039 • MFR #OB-1039 https://bhpho.to/3FsBYah

Q: 4. Which Plates are compatible besides the 504PLONG? Will they work with my other Manfrotto heads?

A: this is compatible with the Manfrotto 501PL Sliding Quick Release Plate with 1/4"-20 Screw

Q: 5. Will an Arca Swiss type plate attach to the top of this? I specifically chose this mode because it doesn't have the proprietary Manfrotto QR plates.

A: Yes. I bought a Hejnar 3.25 Arca type plate. It fits perfectly on top. I had to go to a hardware store to pick up nuts and bolts to secure it down. The thumb nut that comes with the Manfrotto will thread in, but will not prevent twisting since it mates with one thread. You need at least two nuts&bolts to prevent the Arca clamp from twisting on the head.

Q: 6. I have a 190XPROB Tripod currently and am wanting to know if the Nitrotech 608 will mount to my plate?

A: This head has a 3/8"-16 Thread which you will be able to attach to a flat base tripod like the 190XPROB. They are compatible.

Q: 7. Can the quick release be rotated 90 degrees, so one can use this head with an L-bracket (plus lens with no tripod collar)?

A: The QR clamp does not rotate. A QR plate is included for mounting any camera to the head.

Q: 8. What is the difference between this head vs 0705 FSB-8T?

A: The T stands for Touch & Go plate. The FSB 8 comes with sideload attachment of camera plate

Q: 9. Can this be attached to a Sirui P-324S monopod (or any monopod for that matter)? If so, are there additional accessories I need to purchase?

A: The Sachtler 0405 FSB-6T Fluid Head is strictly for tripod or dolly use for two reasons. 1.This fluid head has a ball base and the Sirui P-324S has a flat head so you cannot attach them together. 2.Also this fluid head is much too big and heavy for monopod use.As is, the Sirui P-324S works as a small, elegant video monopod with 360 panning and 20 tilting built in. If you need, you can add a small video head like the MVH500AH Fluid Video Head.

Q: 10. Will this still work if my camera weighs slightly under 4kg? Sometimes my rig weighs around 2.5 - 3.5kg

A: It will not. The load needs to be between 8.8 to 26.4 lb / 4 to 12 kg for the camera to properly balance. The only way you'd be able to use the head would be with it locked down, making it so you cannot pan and tilt for a shot.