The tan Countryman E6i Directional Earset Mic, Medium Gain with Detachable 1mm Cable and 3.5mm locking Connector for Senal Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a 3.5mm locking connector for direct connection to Senal AWS-2000T wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Senal Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will the Yongnuo YN685 Wireless TTL Speedlite for Nikon Cameras communicate with the Nikon wireless remote controller wr-r10?Thank you

A: The only speed light that can be controlled by the WR-R10 is the Nikon SB-5000.

Q: 2. Can the X1T-N be also used as a receiver with XProN as transmitter?

A: No X1T-N is a trigger , you will need a receiver Godox X1R-N BH #GOX1RN

Q: 3. Which zoom range dies the YN685 have on a cropped sensor camera?

A: The YN685 detects when it is connected to a crop sensor camera and appears to track the effective lens focal length while displaying the lens's stated focal length (which is pretty much standard industry practice). Due to the fact that the strobe's native zoom range is 20 to 200 mm, it's ability to track a zoom lens runs out of range at 200 / crop factor (125 mm on Canon's 1.6x crop sensors and 133 mm on Nikon or other 1.5x crop sensors). Once you hit the end of the strobe's zoom range, you'll get light fall off as the beam width exceeds the lens's viewing angle but, fact is, most uses for speedlites with long lenses put the strobes on stands anyway so the zoom tracking issue is moot. Were you to camera mount the flash with, say, a 70 - 200 mm zoom, the YN685 will track out to it's maximum and then run wide as mentioned before.BTW, I have two of these units that I use interchangeably on two full frame and one crop-sensor body. They have been great.

Q: 4. Does a mag mod grip fit the flash?

A: Yes, the Magmod fits this flash.

Q: 5. Will it works in TTL mode with Nikon F100?

A: Ill be completely honest about this product... it only flashes 1 out of every 3 times I take a picture, even if i wait a full min between shots. There is a TTL setting, but it never worked for me, and I had to use Manual. I sincerely hope people spend the 300-500$ and get a Nikon flash, otherwise they might have a paperweight like I now have.

Q: 6. Will this fire a Godox AD200?

A: This is the receiver. What you will need for the AD200 is a transmitter https://bhpho.to/2Z3nzyJ for your camera.

Q: 7. Does half pressing the shutter lights the back of the transmitter?

A: The test button must be fully depressed for the light in the back to illuminate.

Q: 8. Can these work with the Nikon D850 and SB 800 and SB 28?

A: Sure. I have the D800 & D810 and works great as long as you have a compatible flash for the X1 such as Godox or Cheetah

Q: 9. I used my YN685 for the first time this weekend with Duracell 2500 mha rechargeable batteries and after 84 pops in TTL mode the flash told me that the batteries were dead and needed to replace them. I had to go back to the SB800 where I get around 500 pops in TTL mode with the same batteries. Is this a normal function with this flash or is it defective? Also, I recharged the batteries I used in the YN685 and my Maha 8000 charger and it told me that only 500 mha were used out of the 2500 whereas the same batteries out of the SB800 were charged to 2500 which meant that I used them completely. Do I need to return the the unit and get a replacement?

A: You might want to try Panasonic eneloop batteries. I have used them in my YN-685 and YN-560IV and YN-568EX without an issue.

Q: 10. exposure compensation on YN685 Yongnuo?

A: The YN685 allows up to 3 full stops of positive or negative exposure compensation via controls on the back of the unit.