The cocoa Countryman E6i Omnidirectional Earset Mic, Medium Gain with Detachable 2mm Cable and 2.5mm waterproof locking Connector for Lectrosonics Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 2.5mm waterproof locking connector for direct connection to Lectrosonics WM wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Lectrosonics Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Planing to get this trigger and a Godox X1R-S. Would a Hss, TTL still work on Sony Hvl-f43m, Sony Hvl-f60m HSS?

A: the Godox X1T-S TTL Wireless Flash Trigger Transmitter for Sony BH #GOX1TS when used with a X1r-s can do TTL and HSS with Sony Flash HVL-F43 and FVL-F60.

Q: 2. What is the difference between this trigger (the "Godox X1T-S TTL Wireless Flash Trigger Transmitter for Sony") and the "Godox X2 2.4 GHz TTL Wireless Flash Trigger for Sony"?

A: The Godox X2 is an updated transmitter which now adds Bluetooth functionality to sync up with a Godox app for Android and iOS devices. This app controls the power levels of your flash and the modes offered on the transmitter.

Q: 3. Is this compatible with RX1Rii? Will it obstruct the pop up VF?

A: Sorry, but I do not know. I do suggest you call the pros at B&H. They will know the answers and suggest alternatives if appropriate to best fulfill your needs.

Q: 4. Will this fire a Godox AD200?

A: This is the receiver. What you will need for the AD200 is a transmitter https://bhpho.to/2Z3nzyJ for your camera.

Q: 5. I use a Nikon Z7ii with multiple Nikon SB-910 and SB-700 speedlights for off-camera lighting. Will the Godox X2T-N transmitter on-camera combined with Godox X1R-N receivers on the SB-910 and 700s provide iTTL capability to the off-camera speedlights using a Nikon Z7ii?

A: Yes, as long as the right commander and receivers are in place. Please review the following item Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon BH #GOX1RN • MFR #X1R-N https://bhpho.to/2qmEkSW

Q: 6. Which zoom range dies the YN685 have on a cropped sensor camera?

A: The YN685 detects when it is connected to a crop sensor camera and appears to track the effective lens focal length while displaying the lens's stated focal length (which is pretty much standard industry practice). Due to the fact that the strobe's native zoom range is 20 to 200 mm, it's ability to track a zoom lens runs out of range at 200 / crop factor (125 mm on Canon's 1.6x crop sensors and 133 mm on Nikon or other 1.5x crop sensors). Once you hit the end of the strobe's zoom range, you'll get light fall off as the beam width exceeds the lens's viewing angle but, fact is, most uses for speedlites with long lenses put the strobes on stands anyway so the zoom tracking issue is moot. Were you to camera mount the flash with, say, a 70 - 200 mm zoom, the YN685 will track out to it's maximum and then run wide as mentioned before.BTW, I have two of these units that I use interchangeably on two full frame and one crop-sensor body. They have been great.

Q: 7. Does a mag mod grip fit the flash?

A: Yes, the Magmod fits this flash.

Q: 8. Does half pressing the shutter lights the back of the transmitter?

A: The test button must be fully depressed for the light in the back to illuminate.

Q: 9. exposure compensation on YN685 Yongnuo?

A: The YN685 allows up to 3 full stops of positive or negative exposure compensation via controls on the back of the unit.

Q: 10. Hi,I want to ask if it is possible to use YN-685 on-camera to fire Nikon flash set on the YN-622N trigger (on the light stand) so they fire simultaneously? Is that possible please?Thank youMario

A: If I understand you correctly, the answer is No. The YN-622N is the controller that can fire other flashes. Last As I understand it, the YN-622N mounts on the camera and can fire the YN-685 and other compatible flashes. Having the YN-622N means you can control both flashes (and more) from that unit. Also, the YN-685 cannot be triggered by another flash. It can only be fired by mounting to the camera hotshoe or by triggering it with a YN-622N mounted on the camera hotshoe.