The light beige Countryman E6i Omnidirectional Earset Mic, Medium Gain with Detachable 2mm Cable and LEMO 6-pin Connector for Micron Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a LEMO 6-pin connector for direct connection to Micron TX 700-Series wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Micron Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does it include a carrying case?

A: Yes. Mine included a very basic flimsy black carrying case that will hold all of this equipment and more.

Q: 2. Is this available in both V and Gold mounts?

A: No this uses 2 x Sony L-Series (NP-F) only

Q: 3. Does this comes with a bag?

A: Yes

Q: 4. How well will this work with the Indra 500

A: It does a fine job. You must set the Indra to receive Strato II signals. It would be best to use a Strato II Transmitter as it has ABCD groups. But you could also use an Odin Transmitter which has ABC groups. There is no power control as the Phottix system is not set up to allow it.

Q: 5. Is this meter compatible with radio poppers?

A: This is compatible with radio poppers, it requires the pocketwizard tranceivers but it can be done. Read the article on Wireless Flash Power Control in the article attached. https://www.bhphotovideo.com/explora/news/new-sekonic-litemaster-pro-l-478d-and-l-478dr-light-meters

Q: 6. Where do i fund the app?

A: You can get it from the app store for Apple, or for Android from the manufacturer http://bit.ly/2JDfk3e.

Q: 7. Is there a barn door option for this light?

A: Unfortunately, I see no barndoors listed as an available accessory for use with the Yongnuo YN360 II LED Light Wand. However, if you wish, you may make temporary options using the Rosco Matte Black Cinefoil (12 x 50') B&H # ROCF1250B, and gaffers tape such as the ProTapes Pro Gaffer Tape (2 x 30 yd, Black), B&H # PRGT30B.

Q: 8. Would it run off a 12V power cord (attached to a car battery) for field work?

A: We believe that should work if you have the proper adapter, however we are not aware of any specific tests between the two.

Q: 9. How do you change the f stops in setting ? examples 2.81 to 3.2

A: You can select the resolution of the F Stop display in Custom settings (Press the MENU button. Select 3). You can select full stops with 0.10 stop, 0.5 (half stops), or 0.3 (one third stops which is what most digital cameras use). Your examples are the full stop and tenths, and 1/3 stops displays.

Q: 10. I saw several Youngnuo YN360 lights on B&H, but cannot find the AC Adpter for these. Does anyone know which AC adapter will work - both the size of the plug and polarity? I can't believe a company can sell something that is not complete. Not everyone wants to use batteries.

A: I Have 2 of this lights and they come with an adapter to charge your lights the same one can be used as a power source if you don't want to use the battery sometimes I have 0 battery I plug the power adapter and use the light