The black Countryman E6i Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and cH-style 4-pin Connector for Audio Technica Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a cH-style 4-pin connector for direct connection to Audio Technica ATW-T5201 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Audio Technica Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does it work with Nissin i40?

A: The Nissin Air10s Wireless TTL Commander for Sony Cameras is not directly compatible for use with the Nissin i40 Compact Flash for Sony Cameras with Multi Interface Shoe. It is only designed for use with Nissin flashes that have the Nissin 2.4 GHz radio receiver built inside the flash, which are the flashes that end with the letter A indicating they are a part of Nissin's Air system (such as the Nissin Di700A and Nissin i60A flashes) or the Nissin Air R receiver. If you need to use the Nissin Air10s Wireless TTL Commander for Sony Cameras with your Nissin i40 Compact Flash for Sony Cameras with Multi Interface Shoe, you would have to purchase the Nissin Air R Receiver for Sony Flashes with Multi Interface Shoe, B&H # NINDARSNY, to connect to the bottom of the i40 flash. This would add the 2.4GHz radio to your flash for use with the Wireless TTL Commander.

Q: 2. Will it works in TTL mode with Nikon F100?

A: Ill be completely honest about this product... it only flashes 1 out of every 3 times I take a picture, even if i wait a full min between shots. There is a TTL setting, but it never worked for me, and I had to use Manual. I sincerely hope people spend the 300-500$ and get a Nikon flash, otherwise they might have a paperweight like I now have.

Q: 3. Hi,I want to ask if it is possible to use YN-685 on-camera to fire Nikon flash set on the YN-622N trigger (on the light stand) so they fire simultaneously? Is that possible please?Thank youMario

A: If I understand you correctly, the answer is No. The YN-622N is the controller that can fire other flashes. Last As I understand it, the YN-622N mounts on the camera and can fire the YN-685 and other compatible flashes. Having the YN-622N means you can control both flashes (and more) from that unit. Also, the YN-685 cannot be triggered by another flash. It can only be fired by mounting to the camera hotshoe or by triggering it with a YN-622N mounted on the camera hotshoe.

Q: 4. Is this compatible with the Canon 430EX iii-RT speedlight?

A: It is not directly compatible. You would need a receiver to make it work. https://bhpho.to/2LEUdzx

Q: 5. I just bought an SB-910 flash and I did not know that my Nikon D3200 does not have the commander mode. I also have an older D5000 and would like to know if the SU-800 Commander would allow me to shoot the new flash wirelessly with these cameras... Is that possible?

A: Yes, the SU-800 would be allow you to trigger Nikon flashes wireless with the D3200 and D5000 cameras.

Q: 6. Do I need to buy this trigger or does the Panasonic G85 already have a built in trigger for the TT350o?

A: You will need this X1 or the XPro transmitter. The camera does not have one built in.

Q: 7. Any ideas how to use this transmiter and nikon su800 on top of it i want to use 2 godox ad200 with nikon sb910 and sb800 The godox ad 200 is fireing The nikons no

A: You must have a Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon B&H # GOX1RN on the Nikon SB-910 placed off camera so that it can fire with the AD200, while the X1T-N is on camera with the SB-800. https://bhpho.to/2gvAXHk

Q: 8. Does it work with Nikon SB700 & nIKON SB5000?

A: Unfortunately, this Air10S Commander will not fire the SB-700 or SB5000 as Nissin no longer produces a Nikon compatible receiver.

Q: 9. will this work with godox 2.4 GHz because, this unit is also 2.4 GHz ?? J. Payne

A: The Godox X1T-O TTL Wireless Flash Trigger Transmitter for Olympus/Panasonic is compatible for use with Godox receivers and flashes that use Godox's 2.4 GHz X wireless system.

Q: 10. Will the Godox X1R-N TTL wireless flash trigger receiver work with a Nikon D7200?

A: No this is a receiver only made for flash use you need to use the transmitter on your camera X1T