The black Countryman E6 Omnidirectional Earset Mic, Medium Gain with Detachable 2mm Cable and 3.5mm Locking Connector for Azden Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Azden 15BT and 35BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will it works in TTL mode with Nikon F100?

A: Ill be completely honest about this product... it only flashes 1 out of every 3 times I take a picture, even if i wait a full min between shots. There is a TTL setting, but it never worked for me, and I had to use Manual. I sincerely hope people spend the 300-500$ and get a Nikon flash, otherwise they might have a paperweight like I now have.

Q: 2. Can I use it with Lumix S1 ?

A: Yes, you can use this with the Panasonic LUMIX S1.

Q: 3. Does this work well with a Nikon D5000?

A: It works great on my D7100 so I would think just as well on a D5000

Q: 4. Will the Godox X1R-N TTL wireless flash trigger receiver work with a Nikon D7200?

A: No this is a receiver only made for flash use you need to use the transmitter on your camera X1T

Q: 5. Does this trigger works with all their capabilities with the Sony a6500 camera ?

A: Yes this trigger is fully compatible with the Sony A6500.

Q: 6. Do you need a receiver for the Godox TT350s flash to operate with the Godox flash trigger XPro S mounted on a Sony a6500?

A: No you do not , Godox TT350s has build in receiver

Q: 7. will this work with godox 2.4 GHz because, this unit is also 2.4 GHz ?? J. Payne

A: The Godox X1T-O TTL Wireless Flash Trigger Transmitter for Olympus/Panasonic is compatible for use with Godox receivers and flashes that use Godox's 2.4 GHz X wireless system.

Q: 8. Does half pressing the shutter lights the back of the transmitter?

A: The test button must be fully depressed for the light in the back to illuminate.

Q: 9. Will the Yongnuo YN685 Wireless TTL Speedlite for Nikon Cameras communicate with the Nikon wireless remote controller wr-r10?Thank you

A: The only speed light that can be controlled by the WR-R10 is the Nikon SB-5000.

Q: 10. Does this work with existing flashes from Nissin like the Di700A?

A: Once released it will. The release date is still in question at this time. It will also have features for future Nissin flashes yet to be released.