The cocoa Countryman E6 Omnidirectional Earset Mic, Medium Gain with Detachable 1mm Cable and 1/4" Connector for Line 6 Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 1/4" connector for direct connection to Line 6 TBP06 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Line 6 Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this work with 860ii flashes?

A: Yes, the XPRO-S trigger will work with Godox flashes such as the VING V860II-S for Sony.

Q: 2. will it work on Nikon SB 5000?

A: This is a trigger that goes on the camera's hot shoe, then you will have to attach the Godox receiver to the SB5000. The SB5000 will not communicate with Godox directly, you need the receiver.

Q: 3. Should I buy xpros or tt350s? Considering xpros is $69 and tt350S is $85, but 350s is a flash which can also trigger other flashes, would it be more economical to buy a tt350s instead?

A: Yes. unless you plan to bring in another triggering system into the same echo system as Profoto we suggest reviewing the following item so both system will work in same echo system. Godox X2 2.4 GHz TTL Wireless Flash Trigger for Nikon BH #GOX2TN • MFR #X2TN

Q: 4. Will the Godox X1R-N TTL wireless flash trigger receiver work with a Nikon D7200?

A: No this is a receiver only made for flash use you need to use the transmitter on your camera X1T

Q: 5. Do I need to buy this trigger or does the Panasonic G85 already have a built in trigger for the TT350o?

A: You will need this X1 or the XPro transmitter. The camera does not have one built in.

Q: 6. Hi!if I buy the V1 Goddox how works your waranty

A: For warranty repair of the Godox XProN TTL Wireless Flash Trigger for Nikon Cameras under the Limited 1-Year B&H Warranty, you may contact the B&H Customer Service Department either by calling 800.221.5743, by e-mailing cs@bhphoto.com, or via Live Chat.

Q: 7. Does the trigger work with canon 580EX II flash? Thank you.

A: Directly no, you will need to get the Godox receiver.

Q: 8. Will this trigger both the Canon 6000EXll-RT and EL-1?

A: Yes, the Godox X1R-C TTL Wireless Flash Trigger is compatible with both Canon E-TTL / E-TTL II protocol systems.

Q: 9. Will this product work with a Canon 600EX II-RT?

A: One must use the additional receiver under Your flash to be compatable. Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon B&H # GOX1RC MFR # X1R-C

Q: 10. Has anyone used this with a Canon 600EX-RT flash and 5Dsr camera? When I try it's always overexposed, the 600EX-RT only fires at full power. I've updated the firmware (yesterday) and I've tried three different transmitters (X1T-C, TT685, AD360II).

A: If your making manual power adjustments on the transmitter after making the power adjustment you have to press test to send the power level to the unit. If you just press the shutter the power adjustment has not been sent.