The cocoa Countryman E6 Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 3.5mm Locking Connector for Happie Amp or Empower Sound Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Happie Amp or Empower Sound and Amazing Amp wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Happie Amp or Empower Sound Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. is this fully compatable Godox AD400Pro Witstro All-In-One Outdoor Flash?

A: Yes this trigger is fully compatible with the Godox AD400 Pro.

Q: 2. Can I control with XProF TTL flash trigger 2 flashs for a Fuji XT2 a Godox V860IIF and a Nikon SB900 (adding a Godox X1RN transmitter) transmitter/receiver) in a portait studio setup ?

A: Yes off camera it will work your Nikon I believe it will only fire it if the transmitter is for a different flash system like Fuji.

Q: 3. Will this work with an older Sony DSL-R with one of the Sony ADP-AMA Shoe Adapters?

A: Compatibility with cameras using the older Sony/Minolta shoe and a adapter is spotty. Some work some don't even identical models.

Q: 4. Hi is work in canon Flash 470exai

A: Not directly. You would need an X1 receiver.

Q: 5. Can anyone confirm this works with a Nikon D600 and SB-800s. Also, does TTL mode work with this combination? I saw where it does not on some reviews.

A: As long as you are using a Godox X1R-N receiver on the SB-800, the XPRO N should have no problem firing it.

Q: 6. Does this work with the Godox Xplor 600 HS TTL Monolight?

A: Yes, this works with the Godox 600.

Q: 7. Will this trigger the Godox TT600 and allow remote adjustments to the flash power?

A: Yes it will allow you to adjust the power

Q: 8. Does this work well with a Nikon D5000?

A: It works great on my D7100 so I would think just as well on a D5000

Q: 9. I have the Nikon wr-r10 Transmitter for a D850. Can that trigger the X1R-N receiver or do I need the X1T-N?

A: No, the Nikon WR-R10 Wireless Remote Controller will not trigger the Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon. Nikon's proprietary radio system is not compatible for use with Godox's X Wireless Radio System. You would need the Godox X1T-N TTL Wireless Flash Trigger Transmitter for Nikon, B&H # GOX1TN, connected to your camera's hot shoe to wirelessly trigger the Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon connected to your off-camera flash.

Q: 10. Has anyone used this with a Canon 600EX-RT flash and 5Dsr camera? When I try it's always overexposed, the 600EX-RT only fires at full power. I've updated the firmware (yesterday) and I've tried three different transmitters (X1T-C, TT685, AD360II).

A: If your making manual power adjustments on the transmitter after making the power adjustment you have to press test to send the power level to the unit. If you just press the shutter the power adjustment has not been sent.