The light beige Countryman E6 Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and 4-Pin Hirose Connector for Sony Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 4-pin Hirose connector for direct connection to Sony DWT-B01, DWT-G01, DWT-S01, and DWT-V01 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sony Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does this trigger works with HVL-45RM?

A: It is not directly compatible. You can use one of these receivers to make it work. https://bhpho.to/2Gh8EpU

Q: 2. what godox flash is compatible with godox xpro ttl for pentax k3?

A: If you wish to use the flash on-camera, the Godox TT350P Mini Thinklite TTL Flash for Pentax Cameras, B&H # GOTT350P, is the only Godox flash we carry that is listed as compatible for use with Pentax's TTL automatic exposure system. However, if you plan to use the flash wirelessly off-camera with the Godox XProP TTL Wireless Flash Trigger for Pentax Cameras mounted to the camera's hot shoe, then you may use any Godox flash that has their X-Wireless Radio System built inside, as Godox's flashes with their X-Wireless Radio System have cross-brand platform support when used wirelessly. As such, you could use a Godox flash designed for another camera brand for off-camera usage, such as the TTL flashes listed below. The manual flashes I have also listed below would be compatible for use with the Godox XProP TTL Wireless Flash Trigger for Pentax Cameras and would allow you to set the flash output power manually from the XPro trigger mounted on the camera, but would not offer TTL automatic flash support: TTL Speedlite Flashes Godox VING V860IIS TTL Li-Ion Flash Godox TT685S Thinklite TTL Flash Manual Speedlite Flash Godox TT600 Thinklite Flash TTL Bare-Bulb Flashes Godox AD360II-N WITSTRO TTL Portable Flash Godox AD200 TTL Pocket Flash Kit TTL Studio Strobes Godox AD400Pro Witstro All-In-One Outdoor Flash Godox AD600Pro Witstro All-In-One Outdoor Flash Godox AD600B Witstro TTL All-In-One Outdoor Flash Godox Gemini GS200II 200Ws Monolight Godox Gemini GS300II 300Ws Monolight Godox Gemini GS400II 400Ws Monolight Manual Studio Strobes Godox AD600BM Witstro Manual All-In-One Outdoor Flash Godox DP300II Flash Head Godox DP400II Flash Head Godox DP800II Flash Head Godox DP1000II Flash Head Godox QS400II Flash Head Godox QS600II Flash Head Godox QS800II Flash Head Godox QS1200II Flash Head Godox QT400IIM Flash Head Godox QT600IIM Flash Head Godox QT1200IIM Flash Head Godox SK300II Studio Strobe Godox SK400II Studio Strobe

Q: 3. Do you need to attach a Godox receiver unit to each Canon Speedlite being used as a slave unit, or will the Canon RT Speedlites receive and respond to the signals from the Godox transmitter?

A: You will need extra Godox recievers.

Q: 4. Will this work with Calumet Genesis 400W strobes? I have a Sony A7iii.

A: No, the Westcott FJ-X3 S Wireless Flash Trigger for Sony Cameras is designed to trigger Westcott strobes with Sony cameras.

Q: 5. Will Godox X PRO N WORK WITH A COLD SHOE BAR OR DOES IT NEED A ON CAMERA HOT SHOE CONNECTION?

A: The transmitter requires a hotshoe for communication.

Q: 6. Is it safe to assume that No Sony Adapter is needed for this flash trigger?

A: Yes. The following system is designed and made for Sony.

Q: 7. Does TTL, HSS & Manual work on the Sony a1? The fjwestcott page says to use the FJ-X3 M for the a1. Is that info outdated?

A: The FJx3m will work on all camers to use it with the Sony you will need the adaptor. If you are a Sony only shooter then get the FJX3s no adaptor needed.

Q: 8. Can it be used with the Olympus FL-900R flash?

A: This is to trigger the Flashpoint or Godox flashes from a Olympus camera. It most likely will not talk to you Olympus hot-shoe flashes. You'll notice they have these triggers for Canon, Nikon, Sony. It's really to indicate compatibility with the camera to the Godox/Flshpoint lights.

Q: 9. Is this all I will nead to flash the Speedlite 580EX2 and Speedlight 430EX? Will it work at a distance in bright direct sunlight?

A: This trigger works with radio waves, so it is not subject to light interference. To trigger Canon flashes however, you need to attach Godox wireless receivers to your flashes.

Q: 10. Assuming that it has PC cord output, can it handle a 250V sync voltage as on a Vivitar 283 flash?

A: The Westcott FJ-X3 S Wireless Flash Trigger for Sony Cameras is a transmitter only for a camera's hot shoe. The port on it is for charging, and it does not work as a receiver for flashes. There is a manual receiver available, but it cannot handle 250V.