The black Countryman E6i Directional Earset Mic, Standard Gain with Detachable 2mm Cable and 3.5mm Connector for Amplivox Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a 3.5mm connector for direct connection to Amplivox S-1600T and S-1690T wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Amplivox Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this trigger work with Godox V1

A: Yes, the Godox XProC TTL Wireless Flash Trigger for Canon Cameras would be compatible for use with the Godox V1 Flash for Canon.

Q: 2. Will it work with a Nikon SB-R200?

A: Due to firmware the Nikon SB-R200 Wireless Remote Speedlight will only reliably work with Nikon SU-800 Wireless Speedlight Commander Unit https://bhpho.to/3TKyqJa, it will not work with Godox XProN TTL Wireless Flash Trigger for Nikon Cameras.

Q: 3. can you only trigger five flashes? A thru E

A: Yes, you can trigger separately five Godox flashes differently if you set the Godox XProC TTL Wireless Flash Trigger for Canon Cameras, to A-E groups.

Q: 4. Can I sync/use two Godox SK400II-V strobes and my Westcott FJ400 via this Trigger? (Sony)

A: The Godox XProS TTL Wireless Flash Trigger for Sony Cameras cannot speak directly to the radio in the Westcott FJ400 400Ws Strobe with AC/DC Battery (US/No. America Plug), B&H # WEFJ400S. However, you can use the XProS on-camera to trigger Godox lights (with the trigger in manual mode and the camera set to 1/200th of a second). You would put the FJ400 lights into optical-sync mode and they will fire optically when the Godox lights are triggered by the on-camera XProS.

Q: 5. To use the Godox TT350N off camera do I need this trigger, and does the TT350N need a receiver also, or is that built in?

A: Yes, the Godox TT350N can be used as a trigger or receiver. When in the off camera position the Godox TT350N Mini Thinklite TTL Flash requires the Godox XProN TTL Wireless Flash Trigger for Nikon Cameras to operate.

Q: 6. Will this work with the Olympus FL-700WR Flash since it's radio wireless?

A: Unfortunately no but you can use this Olympus trigger instead. Please take a look at the following link: https://bhpho.to/2E2weEL

Q: 7. Will the X Pro N work on Sony a6300 ? ?

A: The Godox XProN TTL Wireless Flash Trigger for Nikon Cameras BH #GOXPRON can be used in manual with a Sony camera. TTL and HSS will not work.

Q: 8. Is it possible to use the Nikon transmitter on a Nikon camera to work with a Godox V1s, sony flash?

A: As long as you ensure the firmware inside both the Godox XProN TTL Wireless Flash Trigger for Nikon Cameras and the Godox V1 Flash for Sony are updated to their most recent firmware version, yes, you should be able to trigger the off-camera Godox V1 Flash for Sony using the Godox XProN TTL Wireless Flash Trigger for Nikon Cameras mounted to a Nikon camera and still retain full functionality.

Q: 9. Does the AF assist beam work with Nikon Z cameras? Z cameras use green assist light.

A: The AF assist beam on the Godox XProN TTL Wireless Flash Trigger for Nikon Cameras does not work with mirrorless cameras, including the Nikon Z series cameras.

Q: 10. Is it compatible with Godox AD100?

A: Yes, the Godox XProC TTL Wireless Flash Trigger for Canon Cameras is compatible for use with the Godox AD100pro Pocket Flash.