The tan Countryman E6 Omnidirectional Earset Mic, Standard Gain with Detachable 2mm Cable and 3.5mm Locking Connector for Olympus, Roland, Sony, Tascam, Yamaha, or Zoom Portable Recorders is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Olympus, Roland, Sony, Tascam, Yamaha, or Zoom DM-420, DM-520, DM-620, DS-2400, DS-40, DS-51, DS-61, DS-71, LS-10, LS-14, R05, R09HR, PCM-D50, PCM-M10, DR-05, DR-07mkII, DR-08, PR-10, Pocketrak C24, Pocketrak W24, H1, H2, and H2n portable recorders.

For Stage, Theater, and Broadcast TV    Fits Select 3.5mm Recorders    Headroom for General Speaking    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is it possible to chain these units together, to get more video inputs?

A: Not ideal, but you can, one unit will be you're master unit and you basically connect the output of you're slave units in to the master unit. A little crazy but .....

Q: 2. Is there any way of running a Aux signal?

A: The V-1SDI has two SDI outputs, one for Program and the other for Preview. They cannot be changed to an Aux input though for operations like sending out a clean signal or a specific isolated camera only.

Q: 3. Will this work with the Vidiu Pro encoder?

A: Yes it will work. You will be able to output from the V-1HD through HDMI in to the Teradek VidiU Pro, B&H #TEVIDIUP.

Q: 4. Using two hdmi inputs can the child picture be altered in size and be moved to any desired position on the maim picture?

A: You will be able to adjust the position of the smaller image on the screen when using Picture-In-Picture Mode. You will also be able to change the color and the width of the border around the smaller image, however you will not be able to change the size of the smaller image itself.

Q: 5. I'm in CANADA Toronto. Do you have a store?

A: Hello there, we do have a store, located in New York City. We also ship all around the world and would be happy to assist you with questions about this product or any others you may be interested in. You could give B&H a call at 1-800.606.6969. Thank you for your interest!

Q: 6. Can this unit store or save a logo frame?

A: While this is a very nice switcher, it does not have the ability to store a logo or frame. However it does have Down Stream Keying capabilities if you wanted to use one of the inputs as a source for graphics and logos.

Q: 7. Is there a way to incorporate a tally light system with this switcher?

A: This is a very basic switcher, have not seen any way for a tally light. If you are looking for a simple, economical switcher, this is a great option, if you want advanced controls or down keys, look elsewhere.

Q: 8. Can you use all 3 outputs at the same time?2 HD-SDI outputs (preview and program) and a quad output via HDMI?Example:1 SDI preview output to projector1 SDI program output to live broadcast/recorder1 HDMI quad view output for the director.

A: Yes, you can use all 3 outputs at the same time.

Q: 9. is the roland v1 hd compatible with vmix software? if yes what steps i should take and necessary stuff i will need to make it work.

A: Yes, you would just need an HDMI Capture device for your computer. Such as this option from Magewell. https://bhpho.to/37FKVhH

Q: 10. Can our company use this switcher for gotomeeting / webex etc? We'd like to connect up to 4 cameras for company meetings.

A: Yes, you will be able to use the Roland V-1HD for GoToMeeting, Webex, and other 3rd party conferencing programs.