The tan Countryman E6i Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and TA4F Connector for HME Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a TA4F connector for direct connection to HME TX550 and TX822 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits HME Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is this compatible with the Godox AR400?

A: The Godox AR400 can be triggered by the Godox XPro S in manual mode only.

Q: 2. Is this trigger compatible with the godox ving v850ii?

A: The Godox XProS TTL Wireless Flash Trigger for Sony Cameras BH #GOXPROS can be used with a V850II for manual only control.

Q: 3. Does a Radio popper receiver work with this trigger?

A: Hi Luis, A Radio Popper receiver is not compatible with this transmitter.

Q: 4. Though not listed, I wonder if this could work with the film EOS Elan 7n, being an E-TTL ll body?

A: Yes. 100% and will recognize the TTL metering system and as well shoot manual if needed.

Q: 5. Will it work with Canon SL3 aka Canon 250D,since camera doesn't have universal pin for third party flashes. I'm asking this question as I happened to read that Godox has a firmware update for the transmitter enabling compatibility with Canon SL3. Regards

A: It will work latest firmware update

Q: 6. Will this trigger work with the Godox V1C for canon? I'm shooting on both sony and canon cameras right now

A: Ye,s the Godox Sony transmitter will work the V1 for Canon off camera.

Q: 7. Will this work on a Nikon FM10 film camera to trigger V860IIF speedlites? (Fuji Version)

A: The Godox XProN TTL Wireless Flash Trigger for Nikon Cameras should work on the Nikon FM10 to set off the Godox V860IIF. You will need to set in the menu of the trigger to use the center pin only. And the flash will be manual only. It will not support TTL or HSS.

Q: 8. Does this work with Godox v1 for Sony? And if so, will it work in bulb mode?

A: It is compatible with the V1. You will have to experiment to see about its compatibility with bulb mode.

Q: 9. Does this work with Alien Bees strobe?

A: Hi Alexis, No, this trigger will not work with your Alien Bee Strobe unless you plug a compatible Godox trigger receiver into the strobe. You will however only have access to manual flash. TTL will not be available. Click on this link: https://www.bhphotovideo.com/c/product/1341961-REG/godox_photo_equipment_x1r_c_ttl_remote_controller.html

Q: 10. Is the Godox XProC compatible with both the Canon EL-1 and the 600EXll-RT speedlights?

A: NO ONLY GODOX LIGHTS!!