The tan Countryman E6i Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 3.5mm Connector for Comtek Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 3.5mm connector for direct connection to Comtek M-72 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Comtek Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does this work with Alien Bees strobe?

A: Hi Alexis, No, this trigger will not work with your Alien Bee Strobe unless you plug a compatible Godox trigger receiver into the strobe. You will however only have access to manual flash. TTL will not be available. Click on this link: https://www.bhphotovideo.com/c/product/1341961-REG/godox_photo_equipment_x1r_c_ttl_remote_controller.html

Q: 2. Though not listed, I wonder if this could work with the film EOS Elan 7n, being an E-TTL ll body?

A: Yes. 100% and will recognize the TTL metering system and as well shoot manual if needed.

Q: 3. Hello, is it compatible with the fujifilm xt5?

A: The Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras BH #GOXPROF is compatible with Fuji cameras.

Q: 4. will the Godox XProO work with the Godox TT685 o flash unit?

A: Yes, the Godox XProO TTL Wireless Flash Trigger for Olympus and Panasonic Cameras works with the Godox TT685O Thinklite TTL Flash for Olympus/Panasonic Cameras.

Q: 5. Does this work with Neewer Z1 (Neewer's version of the V1)?

A: No, the Godox XProC TTL Wireless Flash Trigger will only work with Godox products.

Q: 6. Does this work with Godox v1 for Sony? And if so, will it work in bulb mode?

A: It is compatible with the V1. You will have to experiment to see about its compatibility with bulb mode.

Q: 7. Will this work with the Canon 1200D Rebel T5 Camera?

A: Yes, the Godox XPro C can work on the Canon 1200D/Rebel T5 camera.

Q: 8. I am using a canon R5 and canon flash do I need to buy a receiver along with the transmitter.

A: Yes you will need a Receiver from Godox

Q: 9. does this work on the canon eos r6?

A: You can use the XPro C with the Canon R6.

Q: 10. Can I use these to fire a remote camera as I simultaneiusly fire my hand held camera? One X Pro mounted to hand held, and one mounted to remote cam, with (assumingly necessary) a sync cord?

A: Yes you can use Godox XProC TTL Wireless Flash Trigger to dedicated camera hot shoe and trigger other cameras using the Godox X1R-C TTL Wireless Flash Trigger Receiver on your 2nd camera. You will need to use the trigger cable available in the box of Godox receiver.