The cocoa Countryman E6X Directional Earset Mic, Low Gain with Detachable 2mm Cable and 2.5mm locking Connector for Comtek Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6X earset's cable terminates to a 2.5mm locking connector for direct connection to Comtek M-216 and M-72 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Comtek Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. will the Godox triggers work with a Nikon Z9?

A: Th Xpro N will work with a Nikon Z9.

Q: 2. Is this compatible with Sony FA-WRC1M (Wireless commander) A7R X?

A: To trigger this flash from a Sony FA-WRC1M, you would need the Sony FA-WRR1 Wireless Radio Receiver B&H # SOFAWRR1 attached to it.

Q: 3. Can YN685 work in S1 / S2 optical mode...?

A: Yes you can operate this flash as an optical slave. Use the MODE button and cycle through to this function

Q: 4. Is this flash capable of being a master for the Canon 430 EX II?

A: Yes it is capable of serving as a master for the Canon 430EX II flash. It can also serve as a slave to any other flash within Canons system that serves as a master also.

Q: 5. Will these work with my Phottix Ares Brand ? They look Identical to them.

A: Yes

Q: 6. The f stop always shows on the VS-570N and I shoot manual from the camera and manual from the flash using Vello trigger system and the the f stop on the flash never goes away, does the f8 on the flash affect the flash out come?

A: The f/stop displayed on the flash is normal and does not have anything to do with the output as long as you have the flash set to manual not TTL.

Q: 7. Will this Godox trigger fire a Rotolight NEO 2?

A: The Godox XProN TTL Wireless Flash Trigger for Nikon Cameras is not compatible to fire the Rotolight NEO 2 LED Light.

Q: 8. Can YN685 do HSS using Nikon D750?

A: also forget says I thinking getting one more flash YN685 I used with YN622 xmit I purchased two xmit each camera d610 and d750

Q: 9. Will the Bolt flashes work with the Pocket Wizard MiniTTI and the FlexTT5.

A: Yes they will. As long as the flashes being used with the MiniTTl and FlexTT5 are Canon E-TTL II compatible, then the PocketWizards will not be able to know the difference between these and an original Canon flash.

Q: 10. So I need a trigger and a receiver for the flash on a stand or does the flash receives the signal on its own?

A: This Godox XProS TTL Wireless Flash Trigger for Sony Cameras can trigger a Sony flash equipped with a Godox X1R-S TTL Wireless Flash Trigger Receiver for Sony, BH # BH #GOX1RS or a Godox flash with a built in X Series receiver. https://bhpho.to/3GUmP2H