The tan Countryman E6X Directional Earset Mic, Standard Gain with Detachable 2mm Cable and TA3F Connector for Audix Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6X earset's cable terminates to a TA3F connector for direct connection to Audix RAD360-BP wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Audix Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this Godox trigger fire a Rotolight NEO 2?

A: The Godox XProN TTL Wireless Flash Trigger for Nikon Cameras is not compatible to fire the Rotolight NEO 2 LED Light.

Q: 2. Will I be able to use this flash with my Nikon D300 and fire it wirelessly? I don't mean as a slave, it will be my only flash, but I would like to be able to use it without any cables.

A: This flash will mount directly onto the cameras hotshoe and fire as any traditional flash will and does not require any type of cables or adapters to do so.

Q: 3. Will this trigger a Yongnuo RF-605 transceiver?

A: This transmitter can only fire flashes with a Godox X series receiver built in or a flash with an X series receiver attached.

Q: 4. Will this flash work with the Pocket Wizard FlexTT5, MiniTTI and the ACIII controller.

A: Yes they will. As long as the flashes being used with the MiniTTl and FlexTT5 are Canon E-TTL II compatible (which this one is), then the PocketWizards will not be able to know the difference between these and an original Canon flash.

Q: 5. Currently I can work with nikon sb-910 no top of yn-622 as a master to control other nikon flashes mounted on yn-622 and control from the sb-910 itself on power output of my other nikons. Is it possible to do the smae with the sb-910 as master but instead of nikon flashes to use the new 685n and control their power output from the sb-910?

A: I think this will work for you. As a Canon shooter I use the YN622C controller to independently control other Yongnuo TTL flashes that sit on a YN622 transceiver. However the YN685 is already wireless ready for the YN622 controller (one for Nikon is available). Then from your camera menu you can control other flash configurations adjusting TTL stops or switching to manual or disabling the flash without manually going to the flash to do this. I did not see that the SB-910 is wireless so a YN622 transceiver is required. The YN685 has built-in wireless but for the YN622 for Nikon. Hope this helpfs.

Q: 6. will the Godox triggers work with a Nikon Z9?

A: Th Xpro N will work with a Nikon Z9.

Q: 7. So I need a trigger and a receiver for the flash on a stand or does the flash receives the signal on its own?

A: This Godox XProS TTL Wireless Flash Trigger for Sony Cameras can trigger a Sony flash equipped with a Godox X1R-S TTL Wireless Flash Trigger Receiver for Sony, BH # BH #GOX1RS or a Godox flash with a built in X Series receiver. https://bhpho.to/3GUmP2H

Q: 8. Will the Bolt flashes work with the Pocket Wizard MiniTTI and the FlexTT5.

A: Yes they will. As long as the flashes being used with the MiniTTl and FlexTT5 are Canon E-TTL II compatible, then the PocketWizards will not be able to know the difference between these and an original Canon flash.

Q: 9. Can this flash be triggered wirelessly by an Olympus OMD 10 MK2?Is it compatible on camera with the OMD 10 MK2?

A: Yes, the Bolt VS-570OP Wireless TTL Flash for Olympus/Panasonic Cameras may be used with the Olympus OM-D E-M10 Mirrorless Micro Four Thirds Digital Camera and the Olympus OM-D E-M10 Mark II Mirrorless Micro Four Thirds Digital Camera for wireless flash usage. The built-in flash may be used to trigger the Bolt flash when the the cameras are set to RC Mode under the Shooting Menu in both cameras.

Q: 10. Will these work with my Phottix Ares Brand ? They look Identical to them.

A: Yes