The cocoa Countryman E6X Directional Earset Mic, Low Gain with Detachable 1mm Cable and 4-pin female proprietary Connector for Fender Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6X earset's cable terminates to a 4-pin female proprietary connector for direct connection to Fender Passport wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Fender Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Can I control the flash output from this unit and the X1 receiver to a Nikon sb700? Without having to touch the flash.

A: Yes with a X1 receiver on a SB-700 you can control the power.

Q: 2. Hi. Pentax K3 II works in HSS with Godox XPro P???

A: Yes this transmitter will allow for HSS on the Pentax K3 II.

Q: 3. Will the Yongnuo 685 for Nikon Cameras work with the AC3 Zone Controller for Nikon?

A: muy buen producto, y anda perfectoen mi Nikon D810, lo unico que recalienta cuando se hacen demasiados disparos continuos, no pasa lo mismo con un sb de nikon y los radios tambien funcionan perfectamente

Q: 4. does this work with my canon r5 and my EL-1 speedlite?

A: The Godox XProC TTL Wireless Flash Trigger for Canon Cameras is only compatible with Canon EOS R5 Mirrorless Camera. The Godox will not work with the Canon Speedlite EL-1, as they operate on different wireless systems.

Q: 5. Will this Godox XproN TTL wireless flash work with Profoto B10 OCF Flash Head ?

A: Profoto B10 flash require the use of a Profoto radio. They do not have sync ports for plugging in alternate radios.

Q: 6. Is this compatible with Nikon D5600? All functions work on Nikon D5600?

A: This kit is compatible with a D5600.

Q: 7. I have this transmitter but am switching to a canon camera. Can I use this transmitter with my new canon 80d?

A: Within the Godox/Flashpoint system to preserve TTL capabilities you need the trigger for the camera model (canon trigger for canon camera) but the flashes don't matter. the trigger is what controls the TTL and HSS signal. Keep in mind if you don't want HSS or TTL your trigger will be fine.

Q: 8. Will this work with a canon 600 ex rt ii without having to add a receiver to it since it does have wireless built in?

A: No, it will not; Canon and Godox use different wireless radio communication and are not directly compatible with one another. The Godox XProC TTL Wireless Flash Trigger for Canon Cameras will only directly communicate with the radio receiver built into Godox-branded flahes/studio strobes or by using the Godox wireless radio receiver such as the Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon, B&H # GOX1RC. The Canon 600EX RT-II Speedlite Flash built-in radio receiver is only compatible for use with the Canon wireless transmitter, the Canon Speedlite Transmitter ST-E3-RT (Ver. 2), B&H # CASTE3RTV2, the Yongnuo YN-E3-RT II Wireless Speedlite Transmitter for Canon, B&H # YOYNE3RTII, or the Westcott FJ-X2m Universal Flash Trigger for FJ400 Strobe, B&H # WEFJX2MUWLFT.

Q: 9. I recently switched from Canon to Sony. I have two Yongnuo 600ex-rtII flashes will they work with this trigger on my Sony a7iii? Thank you

A: The YN600EXRT are designed to work with Canon Proprietary radio signals. They will not work with a Sony/Godox combination unless you buy receivers and use them in manual only.

Q: 10. Is it compatible with Nikon D810?

A: Yes, the Yongnuo YN685 Wireless TTL Speedlite for Nikon Cameras, B&H # YOYN685N, would be compatible for use with the Nikon D810 DSLR camera.