Customize the interior of your Nanuk 925 case for maximum gear protection and improved organization with their Padded Divider Insert. The insert features a protective base pad with a set of long and short dividers that can be customized for any gear, even if it changes from trip to trip. Included with the insert are a protective base pad and convoluted foam for the inside lid.

For Organization & Protection    Touch-Fastened Long & Short Dividers    Convoluted Foam Pad for Lid    Protective Base Pad

Related Questions and Answers

Q: 1. Hi, will the ProMediaGear PM501 plate fit with MVH500? If not, is there some other ARCA-Swiss compatible plate? Thanks!

A: I'm afraid not. The MVH500AH is only compatible with the 500PLong Plate. Instead you may want to look at the 502HD, B&H # MAMVH502AH. This model is compatible with different tripod plates, including those that are 501PL style like the plate you mentioned from ProMediaGear.https://bhpho.to/2bKwVVJ

Q: 2. Is the pan handle and the base plate that your camera can screw into included?

A: Yes, it comes with everything pictured

Q: 3. Can anyone give me the measurement/diameter of the bottom of the base (that base that attaches to the tripod)?

A: As per manufacturer specs: Long edge - 10.4cm/4.09 inches; Short edge - 8cm/3.14 inches

Q: 4. Is this the same plate as the 701 and 501 fluid heads?

A: It's a little different, it's longer and works a little differently. But they can be used on this head. I have the 701 also, and I can use the 701's plate on this head. But the plate that comes with this head is longer. Also, this had his top loading, while the previous heads were rear loading, as in, you slid the plate in from the rear.But to answer your question, no this is not the same plate.But to add to it, yes you can use your old plates on this new head and vice versa, they are interchangeable. Hope that helps!

Q: 5. Anyone try this with a video rig 9-10lbs? How does it handle close to max payload?

A: This is a good light-duty head for use with DSLRs and smaller video cameras and it should be good even at max payload. However, since you are asking I would suggest considering a higher capacity head if you are going to be at the max load most of the time.

Q: 6. mail-in rebate valid in Canada?

A: Mail in rebates on the products we sell are generally US only as per the manufacturer. To be sure check through the rebate paperwork.

Q: 7. mvh 500 head spring available in the market.....?

A: The Manfrotto MVH500AH Fluid Video Head with Flat Base B&H # MAMVH500AH is available and in stock today.

Q: 8. From the specs, it is noted that the counter balance is fixed at 2.4kg. However, even with my heaviest lens, the total weight of my setup is only about 1.8 kg. By using this head, would I be able to balance the rig? (so as to make it stay at a certain position without drooping). Please advise. Thanks in advance.

A: ideally you want to match the counterbalance to the payload. In your case it is close but not perfect so it will drift slightly. if you want to ensure the tripod head will hold you will need to engage the lock.

Q: 9. Canon R with bat. grip, Canon 70-200 with RRS lens plate, RRS clamp to head's plate. Will the battery grip hit the head?

A: No, you should not have an issue attaching the attaching your camera and lens to the Manfrotto MVH500AH.

Q: 10. Will the Ronin-S plate fit this tripod?

A: Yes, the plate that comes with the Ronin-S will fit on this tripod head.