The tan Countryman E6X Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 4-pin female proprietary Connector for Fender Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 4-pin female proprietary connector for direct connection to Fender Passport wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Fender Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. is this work with GODOX V1s?

A: No.

Q: 2. Greetings, just received a new Bolt VS-570N, I'm noticing there are options for additional power supplies, PC sync and Firmware upgrade. Where does one get a cable for such or are there three different cables. Thanks... Kevin

A: There are 3 different cable connections for 3 different purposes. The power supply allows you to connect a battery pack, allowing you to shoot for longer periods of time without running out of battery, and also gives you a faster recycling time from one shot to another. Check out this battery pack as an example: B&H # BOPP310. The PC sync cord connects from the camera to the flash, (assuming your camera has a PC sync) allowing you to take the flash off the camera. Here is a cable from Impact: B&H # IMPCMPCM6 If your camera does not have a PC sync, you can purchase a flash cable from Vello that allows you to do the same thing. B&H # VEOCSN3Finally, the Firmware upgrade is a USB cable that allows you to connect the flash to the computer for firmware updates that Bolt releases.

Q: 3. Will this work with two Godox mono lights and a camera without a hotshoe? I recent got a second Godox mono light and want to use both lights with my large format camera, previously I just used the cable that came with the Godox mono light and connected one end to the light and the other end to the port on my Large Format camera but to use both lights simultaneously I need a remote trigger and receiver, trying to see if this one would work...

A: The receivers in this kit can connect to each Godox monolight. The transmitter can connect to your large format lens via the sync terminal using the Impact Miniphone Male (3.5mm) to PC Male Sync Cord (18"), BH # IM10032390. http://bhpho.to/3aTU8Vg

Q: 4. Is the Bolt VS-570F compatible with my Fuji XT-10?

A: Yes, the Bolt VS-570F Wireless TTL Flash for Fujifilm Cameras would be compatible for use with the Fujifilm X-T10 Mirrorless Digital Camera.

Q: 5. Will Godox XProP work with Yongnuo flashes?

A: Unfortunately, Yongnuo flashes for Pentax, such as the YN585EX, cannot be triggered using this Godox transmitter. This transmitter is currently compatible with the Godox TT350P Mini Thinklite TTL Flash and the Godox AD400/AD600 Pro monolights only. Additionally, there are no external Pentax compatible receivers by Godox at this time.

Q: 6. When using the Sony A7RII camera, will this transmitter allow for full control over the Sony HVL-F60M flash when paired the Godox X1R-S TTL Wireless Flash Trigger Receiver, or will it only trigger the flash via radio frequency, leaving it up to the photographer to dial in power manually for each Sony flash?

A: The Godox XProS TTL Wireless Flash Trigger for Sony Cameras B&H # GOXPROS will allow both control over the flash output and wireless triggering of a Sony HVL-F60M flash attached to a Godox X1R-S Receiver.

Q: 7. I have this kit plus a few extra receivers. Is there anyway to buy a different Phottix transmitter that supports HSS and use with the 3 Ares receivers I have?

A: Since HSS is a product of the TTL system in the camera which is being used, there is no way for a manual trigger such as the Phottix Ares or the Vello Freewave LR to become HSS ready. The only way to have HSS is to use a Phottix trigger such as the Odin or Odin II. Additionally, the Vello Freewave LR works on a different frequency all together, therefore cannot be triggered by another other brand of radio trigger.

Q: 8. Does this work with the Sony A7?

A: Yes it will.

Q: 9. The zoom range is given as 24-105. Is it still effective to use for super telephoto (150-600)?

A: Just put it on 105mm and use the Guide number for that Your Telephoto lens will have a narrower field of view than the flash, so the subject will be covered up to the distance specified by the guide number.

Q: 10. Work with Samsung NX 30 ?

A: I DO NOT KNOW ANYTHING ABOUT THE SAMSUNG NX 30. I PURCHASED THE KIT TO USE ON SONY A6000. IT WORKS BETTER THAN I HAD HOPED. I CAN MOUNT THE TRIGGER ON THE A6000 AND TRIGGER A NIKON SB700 WITH NO PROBLEMS. I USE THE SB700, BECAUSE IT WILL NOT WORK WITH SOME SONY EXTERNAL FLASHES. I HOPE THIS HELPS.