The cocoa Countryman E6X Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 1/4" Connector for Line 6 Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 1/4" connector for direct connection to Line 6 TBP06 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Line 6 Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does this work with the Sony A7?

A: Yes it will.

Q: 2. Does it work with Pocket Wizard?

A: Yes. As the Bolt VS-570C Wireless TTL Flash for Canon Cameras has both a PC sync terminal on the side of the unit and a Canon hot shoe on the bottom of the unit, it would be compatible with with the PocketWizard FlexTT5 Transceiver for Canon, FlexTT6 Transceiver for Canon, MiniTT1 Transmitter for Canon, and Plus IV Transceiver radio remotes with their built-in hot shoes, and with all other PocketWizard remote using their PocketWizard PC1N Locking PC Sync Cable (1') included with the radio remotes.

Q: 3. Is it compatible with Nissin di622?

A: While this trigger could work with the Nissin Di622, it has not been tested to our knowledge. Your results may vary.

Q: 4. is this work with GODOX V1s?

A: No.

Q: 5. Will it work with a Godox flash while off camera?

A: The receiver can fit a Godox flash at the bottom so you can fire it with the Freewave LR trigger.

Q: 6. Is it TTL mounted on a Sony A6000?

A: Yes, the Bolt VS-50SMI can shoot in TTL on a Sony a6000.

Q: 7. I have this kit plus a few extra receivers. Is there anyway to buy a different Phottix transmitter that supports HSS and use with the 3 Ares receivers I have?

A: Since HSS is a product of the TTL system in the camera which is being used, there is no way for a manual trigger such as the Phottix Ares or the Vello Freewave LR to become HSS ready. The only way to have HSS is to use a Phottix trigger such as the Odin or Odin II. Additionally, the Vello Freewave LR works on a different frequency all together, therefore cannot be triggered by another other brand of radio trigger.

Q: 8. When using the Sony A7RII camera, will this transmitter allow for full control over the Sony HVL-F60M flash when paired the Godox X1R-S TTL Wireless Flash Trigger Receiver, or will it only trigger the flash via radio frequency, leaving it up to the photographer to dial in power manually for each Sony flash?

A: The Godox XProS TTL Wireless Flash Trigger for Sony Cameras B&H # GOXPROS will allow both control over the flash output and wireless triggering of a Sony HVL-F60M flash attached to a Godox X1R-S Receiver.

Q: 9. Greetings, just received a new Bolt VS-570N, I'm noticing there are options for additional power supplies, PC sync and Firmware upgrade. Where does one get a cable for such or are there three different cables. Thanks... Kevin

A: There are 3 different cable connections for 3 different purposes. The power supply allows you to connect a battery pack, allowing you to shoot for longer periods of time without running out of battery, and also gives you a faster recycling time from one shot to another. Check out this battery pack as an example: B&H # BOPP310. The PC sync cord connects from the camera to the flash, (assuming your camera has a PC sync) allowing you to take the flash off the camera. Here is a cable from Impact: B&H # IMPCMPCM6 If your camera does not have a PC sync, you can purchase a flash cable from Vello that allows you to do the same thing. B&H # VEOCSN3Finally, the Firmware upgrade is a USB cable that allows you to connect the flash to the computer for firmware updates that Bolt releases.

Q: 10. The zoom range is given as 24-105. Is it still effective to use for super telephoto (150-600)?

A: Just put it on 105mm and use the Guide number for that Your Telephoto lens will have a narrower field of view than the flash, so the subject will be covered up to the distance specified by the guide number.