The tan Countryman E6X Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and 3.5mm Connector for Amplivox Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 3.5mm connector for direct connection to Amplivox S-1600T and S-1690T wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Amplivox Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this set work with the Sony A7R2 and the flash mecablitz 52AF-1?

A: Unfortunately the metal foot is not compatible with the Sony Multi Interface shoe.

Q: 2. where can I get an owners manual?

A: I googled and found this site: https://fccid.io/pdf.php?id=2943363 That's the manual I have in paper - so it's identical

Q: 3. Is the Bolt VS-570F compatible with my Fuji XT-10?

A: Yes, the Bolt VS-570F Wireless TTL Flash for Fujifilm Cameras would be compatible for use with the Fujifilm X-T10 Mirrorless Digital Camera.

Q: 4. May be you know, can be this flash controlled from YN-622N-TX i-TTL Wireless Flash Controller without transmitter?

A: Yes, depending on your personal setup. This flash has Wireless TTL Master Mode for Nikon systems, and Optical TTL Slave Mode for Canon & Nikon systems. You would not need an additional transmitter because it is already built in.

Q: 5. Will it work with a Godox flash while off camera?

A: The receiver can fit a Godox flash at the bottom so you can fire it with the Freewave LR trigger.

Q: 6. Will this flash work with the Pocket Wizard Flex TT5 units for Nikon and let you use both the TTL and manual features on the flash unit and the TT5?

A: Yes, the Bolt VS-570N Wireless TTL Flash for Nikon Cameras should be compatible for use with the PocketWizard FlexTT5. If you wish to set the flash power manually, you would set the output power on the flash itself. If you wish to use i-TTL, you would leave the flash set to i-TTL, and the FlexTT5 would control the flash's output power automatically.

Q: 7. Hi, Is this compatible with both Mamiya RZ67 and Fujifilm GFX?

A: The Vello FreeWave LR Wireless Flash Trigger and Receiver Kit may be used on the hot shoe located on the side of the Mamiya RZ 67 or on the hot shoe on top of a Fujifilm GFX camera.

Q: 8. Hi! Can this flash use with the Olympus PEN E-PL1 Mirrorless Micro Four Thirds Digital Camera and the Olympus OM-D E-M10 Mark II Mirrorless Micro Four Thirds Digital Camera on the hot shoe?

A: Yes, this flash can be used with both the E-PL1 and the OM-D E-M10 Mark II.

Q: 9. Can this flash work on Nikon D3100

A: Yes it will. This flash is compatible with the D3100.

Q: 10. Will the Pc port on this flash be able to trigger other devices when connected to it like a radio transmitter?

A: No, the PC sync port is input only. It will not send a signal out the port to work a transmitter.