The light beige Countryman E6X Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 3.5mm locking Connector for Sony Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 3.5mm locking connector for direct connection to Sony ZTX-B01 and ZTX-B02RC wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sony Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. will this work with the Canon 430 ex II speedlite?

A: The Canon 430ex II alone can not be triggered by this item. However, along with the Godox receiver (BH #GOX1RC), this transmitter can both trigger and control the Canon 430ex II.

Q: 2. Will this work with Paul C Buff lights?

A: Yes, the Sony FA-WRC1M Wireless Radio Commander with FA-WRR1 Wireless Radio Receiver Kit can work with the Paul C. Buff lights, but you need to attach the receiver to the light via a sync cord. Also, it will only work to set off the strobe. It will not allow adjustments.

Q: 3. Will Godox X PRO N WORK WITH A COLD SHOE BAR OR DOES IT NEED A ON CAMERA HOT SHOE CONNECTION?

A: The transmitter requires a hotshoe for communication.

Q: 4. Do you need to attach a Godox receiver unit to each Canon Speedlite being used as a slave unit, or will the Canon RT Speedlites receive and respond to the signals from the Godox transmitter?

A: You will need extra Godox recievers.

Q: 5. Does the AF-assist beam work with X-100 series cameras?

A: Godox XPro Wireless Flash Trigger for Fujifilm X100 cameras for the moment it does not function for AF command' future firmware update I think its possible.

Q: 6. will this work with the Z8?

A: The SmallRig Wireless Remote Controller for Select Sony, Canon, and Nikon Cameras is not compatible with the Nikon Z8.

Q: 7. Is this trigger capable of Over Drive Sync (ODS)? Or just the Phottix Odin?

A: As I understand it correctly, ODS lets you tweak the time the flash fires slightly for each channel in an effort to allow the output curve to appear during the entire shutter duration with certain IGBT flash units. This is not supported on any of the Godox flashes or triggers, only on Phottix. Godox instead uses the more traditional HSS for sync up to 1/8000s.

Q: 8. Can this trigger be synced with the Godox X1TN in order to remotely fire SB910's and SB700?

A: I'm using this trigger with the x1rn receiver on both of my SB-800 flashes and have no issues at all. I see no reason why it won't work with your flashes.

Q: 9. Does the Godox x2t have low light focus assist beam for Sony a7 cameras?

A: Yes the AF assist beam would be available for Sony A7 series cameras.

Q: 10. Can I use non Sony (e.g., Nikon) flash with this?

A: As indicated under the Overview for the Sony FA-WRC1M Wireless Radio Commander with FA-WRR1 Wireless Radio Receiver Kit, it is compatible for use with the following Sony Multi-Interface hot shoe flashes:Compatible FlashesHVL-F32MHVL-F43MHVL-F60MHVL-F42AM (manual only, requires ADP-MAA Shoe Adapter)HVL-F43AM (manual only, requires ADP-MAA Shoe Adapter)HVL-F58AM (manual only, requires ADP-MAA Shoe Adapter)As Nikon flashes do not have the extra pin design on the front of the hot shoe as does Sony's Multi-Interface flashes, there would be no extra communication for adjusting output power, zoom, exposure compensation, HSS, etc. If you use a Nikon flash on the above remote, the flash would have to be set to full Manual mode, and you would have to preset the flash output manually on the Nikon flash.