The tan E6 Omnidirectional Earset Mic, Medium Gain, with Detachable 2mm Cable and Mini 4-Pin Connector for Sabine Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It is a water- and wind-resistant microphone that can be used on either ear for capturing audio in houses of worship, theater, or outdoor vocal and speech applications.

The low-profile, omnidirectional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features three omni caps (very bright +8 dB, bright +4 dB, and flat +0 dB) that deliver response characteristics for most other applications such as recording flute and violin. The E6 Earset is available as a directional microphone too with cardioid and hypercardioid caps. This omnidirectional E6 Earset's cable terminates to a screw-on mini 4-pin connector for direct connection to a Sabine SW16T or SW30T wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 2mm Cable    Mini 4-Pin (SB), See Description    20 Hz to 20 kHz Frequency Response    Headroom for Strong Vocals    Includes +8, +4, and +0 dB EQ Caps    Windscreen    Cable Clips    Carrying Case

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 140 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 140 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For speaking and vocals.

Related Questions and Answers

Q: 1. Is there any way to get my HDMI only camera to input to this? I don't have SDI, but would love a thunderbolt 3 device for my 2017 MBP

A: You would use one of the many HDMI to SDI converters available. You could also consider the UltraStudio Mini Recorder which has HDMI and SDI inputs and is Thunderbolt connected.

Q: 2. Will this work with an M! Studio Mac that has Thunderbolt 4?

A: Yes, Blackmagic Design UltraStudio HD Mini is fully compatible with Mac Studio 4X Thunderbolt.

Q: 3. Can this device take a 4K sequence from Premiere Pro on a Mac M1 Studio, and covert it to an SDI 1080 output?

A: The Blackmagic Ultra Studio HD Mini can accept signals of up to DCI 2K quality. It would not work with a 4K signal.

Q: 4. Can one Mac run both this and the ATEM software control?

A: Yes, the Blackmagic Design UltraStudio HD Mini, and an Black Magic Atem switcher should be able to coexist on a single Mac. Please add the cable below it is not included with the HD Mini. Also, please make sure you have Thunderbolt 3 ports on your Mac for the Blackmagic Design UltraStudio HD Mini. Apple Thunderbolt 3 Cable (2.6') BH #APMQ4H2AMA

Q: 5. Does the HD Mini work with Mac Ventura?

A: Yes, the Blackmagic Design UltraStudio HD Mini (BH #BLUSHDMINI) can be used with Ventura on a Mac.

Q: 6. Can I input and output different signals at the same time with this?

A: You have 1 SDI input and 2 SDI outputs. You can be taking a av feed from that while you output a different source like a youtube video or graphics or some other source. I've used programs like wirecast or OBS to accomplish this. However, the 2nd output is just a loop of the 1st output so you can't output 2 different things at the same time as it is natively.

Q: 7. Very new to this - can key and fill be sent from ProPresenter 7 via SDI or will that only come from Thunderbolt 3? Also, silly question, how is it powered?

A: The Blackmagic Design UltraStudio HD Mini can output key and fill via the SDI outputs. The Blackmagic Design UltraStudio HD Mini is powered via the Thunderbolt 3 input, which will draw power from the host computer.

Q: 8. My primary need is to digitize SD and HDV tapes. My tape decks all output via component and composite. Is there any reason I should buy the Ultrastudio 4K version rather than this HD Mini?

A: You would want the Ultrastudio 4K version if you want to capture in 4K. If you want to capture just SD/HD the Ultrastudio HD will do the job.

Q: 9. Can this be used on PC's with thunderbolt 3? Does the port have to be directly connected to thunderbolt 3 or can it pass through a doc? All PC/windows 10.

A: The Blackmagic Design UltraStudio HD Mini supports Thunderbolt 3 only. In order to do what it does, only TB 3 is fast enough.

Q: 10. Can this be upgraded by software, so that a Y/C video signal can be ingested via two BNC ?

A: Good Morning! While this is a cool Idea it's not something that's possible at this time. I would suggest the https://www.bhphotovideo.com/c/product/558906-REG/Blackmagic_Design_CONVMAAS_Mini_Converter_Analog_to.html.