The beige E6 Omnidirectional Earset Mic, Highest Overload, with Detachable 1mm Cable and TA4F Connector for Revolabs Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It is a water- and wind-resistant microphone that can be used on either ear for capturing audio in houses of worship, theater, or outdoor vocal and speech applications.

The low-profile, omnidirectional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features three omni caps (very bright +8 dB, bright +4 dB, and flat +0 dB) that deliver response characteristics for most other applications such as recording flute and violin. The E6 Earset is available as a directional microphone too with cardioid and hypercardioid caps. This omnidirectional E6 Earset's cable terminates to a TA4F connector for direct connection to a Revolabs HD (Countryman adapter) wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 1mm Cable    TA4F (RV), See Description    20 Hz to 20 kHz Frequency Response    Headroom for Strong Vocals    Includes +8, +4, and +0 dB EQ Caps    Windscreen    Cable Clips    Carrying Case

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 140 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 140 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For strong vocals.

Related Questions and Answers

Q: 1. Is a Godox pro trigger compatible with rechargeable AA batteries?

A: Godox only recommends for the Godox XProC TTL Wireless Flash Trigger for Canon Cameras AA alkaline batteries. So, it is best not to use rechargeable batteries.

Q: 2. Having just moved over to the Sony a7riv from Nikon, and having multiple Nikon SB800 flashes, will this trigger for the Sony fire the Nikon flashes and what other accessories would I need to get to make this happen?

A: Yes with Nikon receivers # GOX1RN

Q: 3. Recently one of my YN685's battery door latch won't hold the door closed. I understand this is a known issue that has occurred for many owners. Is there a solution or does that make a good flash disposable?

A: The Yongnuo Battery Door Replacement for YN-685 and YN-600EX-RT II Speedlites is available on the B&H Website: https://bhpho.to/2JznolS

Q: 4. Does it work in TTL mode (including A:B) with Nikon Z8 and Godox TT685N flashes?

A: Yes, the commander will adapt to all 3 protocol systems for the Nikon Z8 that being control modes Manual, TTL, i-TTL.

Q: 5. Would this be fully compatible with the Canon eos R7?

A: Yes. With all firmware updates in place both camera and commander yes unit works great reading the TTL protocol system.

Q: 6. I understand this Sony trigger will work on my Sony A1 to trigger Nikon flashes using the Godox Nikon receivers. Correct? What are the limitations? I assume it will only trigger and I will have to set power, etc manually at each flash. Correct?

A: As long as the Godox XProS TTL Wireless Flash Trigger for Sony Cameras is mounted onto a Sony camera with a Multi-Interface hot shoe, it can communicate with other Godox-branded flashes and wireless radio receivers as long as they are X-wireless compatible and they have been updated with the most recent firmware. If the Godox receivers you use with your Nikon flashes have the most recent firmware, the Godox XProS TTL Wireless Flash Trigger for Sony Cameras will wirelessly trigger your Nikon flashes, and you should be able to use both TTL or manual power settings.

Q: 7. Is this flash capable of being a master for the Canon 430 EX II?

A: Yes it is capable of serving as a master for the Canon 430EX II flash. It can also serve as a slave to any other flash within Canons system that serves as a master also.

Q: 8. My set up is a Nikon Z9 and a SB-5000 flash. I use the WR-R10/WR-T10/WR-A10 Wireless Remote for off camera flash, but want to control the flash power remotely as well. The Nikon WR-1 is $625, while this Godox is only $69. Will this work with my set up? Thanks.

A: No, the Godox XProN TTL Wireless Flash Trigger for Nikon Cameras is only for Godox brand flashes that support it.

Q: 9. Currently I can work with nikon sb-910 no top of yn-622 as a master to control other nikon flashes mounted on yn-622 and control from the sb-910 itself on power output of my other nikons. Is it possible to do the smae with the sb-910 as master but instead of nikon flashes to use the new 685n and control their power output from the sb-910?

A: I think this will work for you. As a Canon shooter I use the YN622C controller to independently control other Yongnuo TTL flashes that sit on a YN622 transceiver. However the YN685 is already wireless ready for the YN622 controller (one for Nikon is available). Then from your camera menu you can control other flash configurations adjusting TTL stops or switching to manual or disabling the flash without manually going to the flash to do this. I did not see that the SB-910 is wireless so a YN622 transceiver is required. The YN685 has built-in wireless but for the YN622 for Nikon. Hope this helpfs.

Q: 10. Is this compatible with the Godox R200?

A: The Godox R200 ringflash is an attachment for an AD200. The AD200 is compatible with this transmitter.