The tan Countryman E6i Directional Earset Mic, Medium Gain with Detachable 2mm Cable and TA4F Connector for Shure Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a TA4F connector for direct connection to Shure MXW1 and MXW1/0=-Z11 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Shure Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is my Nikon Speedlight SB-700 compatible with this wireless flash trigger?

A: No, the following item is needed in order to adapt to the Nikon protocol system. Godox X1R-N TTL Wireless Flash Receiver for Nikon BH #GOX1RN • MFR #X1R-N https://www.bhphotovideo.com/c/product/1341962-REG/godox_x1r_n_ttl_remote_controller.html

Q: 2. In M While each group has a different power level, is it possible to adjust the power of ALL GROUPS simultaneously?

A: Yes. For more assistance feel free to reach out to our live chat agents for the best hand on assistance in the industry. https://bhpho.to/3NikaRL

Q: 3. Does this work with Godox v1 for Sony? And if so, will it work in bulb mode?

A: It is compatible with the V1. You will have to experiment to see about its compatibility with bulb mode.

Q: 4. Does a Radio popper receiver work with this trigger?

A: Hi Luis, A Radio Popper receiver is not compatible with this transmitter.

Q: 5. Is this trigger compatible with the godox ving v850ii?

A: The Godox XProS TTL Wireless Flash Trigger for Sony Cameras BH #GOXPROS can be used with a V850II for manual only control.

Q: 6. Would I be able to use this flash/transceiver combination with HSS speeds of 1/1000 or faster? Does it support the Nikon flash/auto ISO feature? I use HSS and sometimes flash auto ISO with a better beamer for wildlife photography.

A: You can shoot it as fast as your camera is capable of up to 1/8000th. It might be able to do Auto ISO, but you will probably get better results just picking a static ISO and setting it.

Q: 7. Will Godox work with elinchrom strobe and is it compatible with its high speed sync functionality?

A: No, the Godox XProN TTL Wireless Flash Trigger for Nikon Cameras and Godox's X-wireless radio system are not compatible for use with Elinchrom's Skyport wireless radio system.If you already own the Godox XProN and you simply want to trigger the Elinchrom strobe, you may purchase a compatible X-wireless radio receiver such as the Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon, B&H # GOX1RN, along with a sync cable such as the Vello 3.5mm Remote Shutter Release Cable for Cameras with 2.5mm Sub-Mini Connections, B&H # VERCCC135. However, this will only give you manual wireless triggering capabilities, and would not give you TTL, high-speed sync, or wireless power output control.

Q: 8. Will this work with my Nikon D3x?

A: Yes it will work.

Q: 9. Hello was curious if this will pair with my godox ad400 pro? I see in the specs it says godox wistro ad400 pro but I'm not sure if that's the same thing or not?

A: Yes.

Q: 10. Can I use these to fire a remote camera as I simultaneiusly fire my hand held camera? One X Pro mounted to hand held, and one mounted to remote cam, with (assumingly necessary) a sync cord?

A: Yes you can use Godox XProC TTL Wireless Flash Trigger to dedicated camera hot shoe and trigger other cameras using the Godox X1R-C TTL Wireless Flash Trigger Receiver on your 2nd camera. You will need to use the trigger cable available in the box of Godox receiver.