Countryman E6i Omnidirectional Earset Mic, Medium Gain With Detachable 2mm Cable And 3.5mm Locking Connector For Sky Wireless Transmitters (light Beige)
- Product Code: ga254070
-
The light beige Countryman E6i Omnidirectional Earset Mic, Medium Gain with Detachable 2mm Cable and 3.5mm locking Connector for Sky Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.
The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.
The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 3.5mm locking connector for direct connection to Sky UT86P wireless bodypack transmitters.
For Stage, Theater, and Broadcast TV Fits Sky Transmitters Headroom for Speaking and Vocals Detachable 2mm Diameter Cable Soft, Flexible Boom Larger, Silicone Rubber Earpiece Includes Windscreen 3 x Protective Caps Black and White Single Tie Cable Clips Carrying Case
Key Specs | |
---|---|
Compatible Transmitters | Sky: UT86P |
Polar Pattern | Omnidirectional |
Frequency Response | 20 Hz to 20 kHz |
Maximum SPL | 130 dB (A-Weighted) |
Sensitivity | W6/6/Mid Gain for Speaking and Vocals (H6, E6, EM6, EM2) |
Analog Output | 1x 1/8" / 3.5 mm TRS Male (Locking) |
Environmental Resistance | Water-Resistant with Included Housing (Unrated) |
Microphone | |
Compatible Transmitters | Sky: UT86P |
Polar Pattern | Omnidirectional |
Included Tone/Pattern Caps | +4 dB Bright, +0 dB Flat, +8 dB Very Bright |
Performance | |
Frequency Response | 20 Hz to 20 kHz |
Maximum SPL | 130 dB (A-Weighted) |
Sensitivity | 2 mV/Pa |
Sensitivity | W6/6/Mid Gain for Speaking and Vocals (H6, E6, EM6, EM2) |
Equivalent Noise Level | 29 dB (A-Weighted) |
Connectivity | |
Analog Output | 1x 1/8" / 3.5 mm TRS Male (Locking) |
Cable Length | 5' / 1.52 m |
Cable Diameter | 0.079" / 2 mm |
Power | |
Power Sources | Plug-In Power |
Operating Voltage | 1 to 2 V |
Physical | |
Color | Light Beige |
Environmental Resistance | Water-Resistant with Included Housing (Unrated) |
Weight | 0.07 oz / 2 g |
The Countryman earsets are very small, lightweight, and the least visible headworn microphones.
The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.
The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.
The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)
Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.
The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.
Related Questions and Answers
Q: 1. This meter works with profoto b10 plus lights...? Thanks
A: You can use it with a B10, but it will not have direct control of the light.
Q: 2. B&H staff says below that this light does not adapt to fresnel system but F10 Fresnel Attachment is listed here - will it work?
A: I just put the F10 Fresnel on the small rig 220b The Fresnel did fit but it did not do as nice as a job as it does on the aputure lights.
Q: 3. Any Soft box recommendations to fit this light
A: Unfortunately, there is no soft boxes for this. However, we do have these diffusers for that. Please take a look at this here: https://bhpho.to/2BC0bLl
Q: 4. Are there any issues using this with a fresnel? The Amaran 200x has rows of cool and warm LEDs, so using a fresnel with that light is problematic. The SmallRig 220b seems to have similar rows of LEDs.
A: No. The following system does not adapt to any fresnel system.
Q: 5. Luddite question: can the touchscreen actually be operated with (winter) gloves?
A: You would need touchscreen-compatible gloves, but it can be operated with gloves.
Q: 6. I have an LS60x and I want another one that’s brighter. Bi-color and focusing, but more watts.
A: The Aputure LS 60x Bi-Color LED Focusing Flood Light BH #APLS60X only comes in one power level. Something like the B&H # KIPRACT632 could be a higher power focusing bi color light.
Q: 7. I have soft boxes with Bowen's mount rings. Can these be used with these light?
A: No. The following system will only adapt to the following speed rings. Angler Speed Ring for Angler Shadow Focus Spot BH #AN7464SFS • MFR #7464-SFS https://bhpho.to/3plAuHp
Q: 8. Does it need calibration like the the c800?
A: The L-858D-U is already calibrated by the manufacturer.
Q: 9. How much time will this run at full power, with a 14.8V, 146Wh battery?
A: 146Wh battery / 260w LED = about 30 minute run time.
Q: 10. What battery(ies) can be purchased for use with this light?
A: This light has a built in Sony NP-F style battery plate. B&H # DRBK2NPF2200 is a great kit from Dracast with two NP-F 2200mAh Batteries and a Charger. https://bhpho.to/2j5z96a
Top Bestselling Products
Products You May Like
Canson Infinity Arches Bfk Rives White Paper (24" X 10', Roll)
$147.72 $197.94
Gogoril Cubed Foam For G33 Hardcase
$129.24 $183.52
Ikelite Underwater Housing For Panasonic Lumix Zs100 Or Tz101
$2,085.00 $3,106.65
Sirui 50mm F/1.8 Super35 Anamorphic 1.33x Lens (l Mount)
$1,197.00 $1,843.38
Dana Dolly Anti-tip Bracket Kit
$299.97 $419.96
Bosch Nda-5070-cbl Clear Bubble For Flexidome 5100i Cameras
$120.00 $164.40
Easyrig 700n Large Gimbal Rig Vest With Standard Top Bar & Quick Release
$11,214.00 $14,241.78
K&m 11936 Storage Box For Wagon (black)
$329.97 $412.46
Carl Heavy Duty 3-hole Paper Punch
$89.34 $129.54
Phottix Ph92512 Gear Bag (27.5", Black)
$143.85 $181.25
Kensington Privacy Screen For 14" Laptop
$104.97 $165.85
The Screen Works Replacement Surface For E-z Fold Projection Screen-8x8'
$1,853.85 $2,613.93
Tiffen Combination 85b/nd Filter (5 X 5", 1-stop)
$908.85 $1,363.28