The tan Countryman E6i Omnidirectional Earset Mic, Medium Gain with Detachable 1mm Cable and TA3F Connector for Audix Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a TA3F connector for direct connection to Audix B60 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Audix Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. i own a fuji gfx 50s , and a canon 600 ex rt II flash. if i bought Godox XProF TTL Wireless Flash Trigger for Fujifilm, will the Godox X1RC for Canon work with this set up?

A: Yes, the Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras will work on your Fuji gfx 50s with a canon flash and the Godox X1RCr. But the flash will only work in manual.

Q: 2. Is it compatible with Nikon D810?

A: Yes, the Yongnuo YN685 Wireless TTL Speedlite for Nikon Cameras, B&H # YOYN685N, would be compatible for use with the Nikon D810 DSLR camera.

Q: 3. Can this be remotely triggered by a Sony a6000? Can the built-in camera flash trigger it, or do I need any additional equipment?

A: Yes, you can trigger from your sony a6000 using your built-in pop up flash ,no need or any additional equipment.

Q: 4. Can I use it with Sony cameras? Specifically A7III?

A: This system is not compatible with the Sony Multi-Interface Shoe as found on the A7 III. A compatible option with TTL and HSS functions available on it is the Godox X1T-S TTL Wireless Flash Trigger Transmitter for Sony B&H # GOX1TS and the Godox X1R-S TTL Wireless Flash Trigger Receiver for Sony B&H # GOX1RS. https://bhpho.to/2X0htLn https://bhpho.to/2S49A3Q

Q: 5. 1. Are Godox receivers (sold separately of course ) needed on Nikon Flashes ie SB700, SB800 for the Godox X Pro to work that is fire the flashes?

A: Yes, Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon B&H # GOX1RN

Q: 6. So, I'm using my Canon 580EXII speedlite on a stand with an umbrella, Will it work with just the hot shoe or do I need to plug anything in? I'm asking because my sync cord port on my speedlite is damaged and with cords it misfires.

A: Yes! This can work with just the hot shoe. I am using mine directly from the hot shoe with a range up to 150 feet away.

Q: 7. I have 2 nikon sb 600 flashes - will the godox XProN fire the flashes without having recievers attached?

A: No, the following system will only communicate with Godox echo system.

Q: 8. Is this compatible with the Godox AD200?

A: Yes it is, I use it with my X-T2 together with two AD600.

Q: 9. Is this unit compatible with the TT350F flash?

A: Yes, I use it with my 350F and the 685Fworks really well. It's a pleasure to have remote done so easily.

Q: 10. Is this compatible with Nikon D5600? All functions work on Nikon D5600?

A: This kit is compatible with a D5600.